NIST logo

Publications Portal

You searched on:
Topic Area: Environment/Climate
Sorted by: title

Displaying records 341 to 350 of 445 records.
Resort by: Date / Title


341. Reduce Costs and Increase Quality with Information Exchange Standards for Manufacturing Quality
Topic: Environment/Climate
Published: 9/4/2009
Author: John A Horst
Abstract: With the proliferation of computers to process, store, and transfer information, manufacturers are suffering increasing costs due to information incompatibilities. The information incompatibility problem in manufacturing quality is costly to everyo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903668

342. Regenerative Stability Analysis of Highly Interrupted Machining
Topic: Environment/Climate
Published: 5/1/2002
Authors: Matthew A. Davies, Jon Robert Pratt, Brian S. Dutterer, Timothy J Burns
Abstract: We discuss theoretical and experimental work that supports the use of very low radia immersion in the high-speed milling of difficult-to-machine materials, such as titanium alloys. Our theory is based upon modeling the cutting process by a kicked ha ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823351

343. Regenerative Stablity Analysis of Highly Interrupted Machining
Topic: Environment/Climate
Published: 1/1/2001
Authors: Matthew A. Davies, Jon Robert Pratt, Brian S. Dutterer, Timothy J Burns
Abstract: We discuss theoretical and experimental work that supports the use of very low radia immersion in the high-speed milling of difficult-to-machine materials, such as titanium alloys. Our theory is based upon modeling the cutting process by a kicked ha ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821868

344. Repeatability Analysis on the Tool Point Dynamics for Investigations on Uncertainty in Milling Stability
Report Number: 823028
Topic: Environment/Climate
Published: 11/11/2007
Authors: Kang-Jae Lee, M Alkan Donmez
Abstract: Stability analysis is needed to maximize milling performance while avoiding chatter. However, such an analysis is time-consuming, requiring the use of sophisticated instrumentation, and has significant level of uncertainty, which impedes the widespre ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823028

345. Results from the International Halocarbons in Air Comparison Experiment (IHALACE)
Topic: Environment/Climate
Published: 6/1/2013
Authors: Bradley Hall, George C Rhoderick, A Engel, J. Muhle, J. W. Elkins, F. Artuso, E. Atlas, M. Aydin, D. Blake, E. G. Brunke, S. Chiavarini, P. J. Fraser, J. Happell, P. B. Krummel, I. Levin, M. Loewenstein, M. Malone, S. A. Montzka, S. O'Doherty, S. Reimann, E. S. Saltzman, H. E. Scheel, L. P. Steele, M. K. Vollmer, R. F. Weiss, D. Worthy, Y. Yokouchi
Abstract: The International Halocarbons in Air Comparison Experiment (IHALACE) was conducted to document relationships between calibrations scales among various laboratories that measure atmospheric greenhouse and ozone depleting gases. Six stainless steel cyl ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914533

346. Retention and Selectivity for Polycyclic Aromatic Hydrocarbons in Reversed-Phase Liquid Chromatography
Topic: Environment/Climate
Published: 6/1/1995
Authors: Lane C Sander, Stephen A Wise
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902928

347. Review of Modeling of Clays and Mineral Surfaces
Topic: Environment/Climate
Published: 9/1/2004
Author: Eric J Cockayne
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=854247

348. Robust Optimization for Smart Machining System: An Enabler for Agile Manufacturing
Topic: Environment/Climate
Published: 11/1/2005
Authors: Laurent Deshayes, Lawrence A Welsch, Robert W Ivester, M Alkan Donmez
Abstract: This paper reports our efforts towards developing a mathematical and information framework for optimization of machining processes within a Smart Machining System (SMS). An SMS uses diverse integrated technologies that enable an enterprise to: (1) p ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822310

349. Role of Particle/Polymer Interphase in Long-Term Performance of Nanofilled Polymeric Coatings
Topic: Environment/Climate
Published: 9/3/2012
Authors: Xiaohong Gu, Guodong Chen, Minhua Zhao, Stephanie S Watson, Tinh Nguyen, Joannie W Chin, Jonathan W. Martin
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907239

350. Role of salt on adhesion of an epoxy/aluminium (oxide) interface in aqueous environments
Topic: Environment/Climate
Published: 2/16/2014
Authors: Christopher C White, Kar T. Tan, Donald Lee Hunston, Justin M Gorham, Aaron M Forster, Vogt D Bryan
Abstract: The durability of adhesive joints in hostile environments is a major area of concern in structural adhesive bonding. Therefore, understanding the mechanics and mechanisms of degradation of adhesive joints is a key factor for more extensive use in fut ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915129



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series