NIST logo

Publications Portal

You searched on: Topic Area: Environment/Climate Sorted by: title

Displaying records 321 to 330 of 453 records.
Resort by: Date / Title


321. Polycyclic Aromatic Hydrocarbon Emissions from the Combustion of Crude Oil on Water
Topic: Environment/Climate
Published: 9/1/1990
Authors: Bruce A Benner Jr, Nelson P Bryner, Stephen A Wise, George William Mulholland, R. Lao, M. F. Fingas
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902446

322. Polycyclic Aromatic Hydrocarbon Structure Index
Series: Special Publication (NIST SP)
Report Number: 922
Topic: Environment/Climate
Published: 6/1/1998
Authors: Lane C Sander, Stephen A Wise
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902933

323. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Series: Journal of Research (NIST JRES)
Report Number: 119.019
Topic: Environment/Climate
Published: 9/16/2014
Authors: John A. Slotwinski, Edward Joseph Garboczi, Keith M. Hebenstreit
Abstract: Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these par ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915141

324. Porosity of Additive Manufacturing Parts for Process Monitoring
Topic: Environment/Climate
Published: 7/26/2013
Authors: John A. Slotwinski, Edward Joseph Garboczi
Abstract: Some metal additive manufacturing processes can produce parts with internal porosity, either intentionally (with careful selection of the process parameters) or unintentionally (if the process is not well understood.) Material porosity is undesirable ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914546

325. Predicting the In-Service Performance of Materials Exposed to Outdoor Weathering
Topic: Environment/Climate
Published: 5/12/2010
Authors: Christopher C White, Kar T. Tan, Donald Lee Hunston
Abstract: Test methods were developed to duplicate the failure modes that occur to sealants during exposure in structures. The methods used a systematic approach to identify independent and synergistic effects of various aging factors on the durability of seal ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905163

326. Preparation and Analysis of a Marine Sediment Reference Material for the Determination of Trace Organic Constituents
Topic: Environment/Climate
Published: 1/1/1990
Authors: Michele M Schantz, Bruce A Benner Jr, S. N. Chesler, B. J. Koster, K. E. Hehn, S. F. Stone, William R. Kelly, Rolf Louis Zeisler, Stephen A Wise
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902452

327. Preparation and Analysis of a River Sediment Reference Material for the Determination of Trace Organic Constituents
Topic: Environment/Climate
Published: 1/1/1992
Authors: R. E. Rebbert, S. N. Chesler, Franklin R Guenther, B. J. Koster, Michele M Schantz, Stephen A Wise
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902457

328. Process Effects on White Layer Formation in Hard Turning
Topic: Environment/Climate
Published: 1/1/1998
Authors: Y K Chou, Christopher J. Evans
Abstract: This paper discusses surface microstructural alterations in hard turned steels. A metallurgically unetchable structure, called white layer?, followed by a dark etching layer has been found on AISI 52100 steel surfaces machined in a hardened state (60 ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820029

329. Process Intermittent Measurement for Powder-Bed Based Additive Manufacturing
Topic: Environment/Climate
Published: 8/31/2011
Authors: April Lynne Cooke, Shawn P Moylan
Abstract: Process intermittent measurements of parts fabricated by additive manufacturing (AM) can enable both in-process improvement and characterization of parts' internal geometries. The planar, layer-upon-layer nature of most AM processes allows simple two ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909381

330. Productivity Improvement through Modeling: An Overview of Manufacturing Experience for the Food Industry
Topic: Environment/Climate
Published: 3/3/2008
Author: Robert W Ivester
Abstract: Food production and manufacturing of durable goods share common needs for understanding, modeling, and controlling processing conditions in order to obtain desirable product characteristics. This paper presents a review of research on manufacturing p ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823010



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series