NIST logo

Publications Portal

You searched on: Topic Area: Environment/Climate Sorted by: date

Displaying records 1 to 10 of 453 records.
Resort by: Date / Title


1. Effects of wafer noise on the detection of 20 nm defects using optical volumetric inspection
Topic: Environment/Climate
Published: 2/11/2015
Authors: Bryan M Barnes, Francois R. Goasmat, Martin Y Sohn, Hui H. Zhou, Andras Vladar, Richard M Silver
Abstract: Patterning imperfections in semiconductor device fabrication may either be noncritical [e.g., line edge roughness (LER)] or critical, such as defects that impact manufacturing yield. As the sizes of the pitches and linewidths decrease in lithography, ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916347

2. Assessment of Crude Oil and a Dispersant in a Simulated Spartina alterniflora Salt Marsh Ecosystem
Topic: Environment/Climate
Published: 12/1/2014
Authors: P Key, K Chung, C Cooksey, DeLorenzo M, M Fulton, D Greenfield, T Greig, J Hylund, Bryant C Nelson, Varun Patel, P Pennington, Elijah J Petersen, E Wirth
Abstract: NOAA‰s Environmental Sensitivity Index (ESI) lists saltmarshes along the Atlantic and Gulf Coasts as the most vulnerable habitat to oil spills. As a result of the Deepwater Horizon offshore drilling rig accident, more that 200 million gallons of cr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917166

3. An Additive Manufacturing Test Artifact
Series: Journal of Research (NIST JRES)
Report Number: 119.017
Topic: Environment/Climate
Published: 10/23/2014
Authors: Shawn P Moylan, John A. Slotwinski, A L Cooke, Kevin K Jurrens, M Alkan Donmez
Abstract: We propose a test artifact, intended for standardization, for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining tes ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914526

4. A pilot interlaboratory comparison of protocols that simulate aging of nanocomposites and detect released fragments
Topic: Environment/Climate
Published: 10/1/2014
Authors: Wendel Wohlleben, Deborah L Stanley, Justin M Gorham, Li Piin Sung, Tinh Nguyen
Abstract: The safe use of nanocomposites depends, in part, on a good understanding of the fate of nanofillers throughout the nanocomposite,s lifecycle. Various modifications of ISO weathering protocols have been proposed to assess what is released and at which ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916125

5. Characterization of Metal Powders Used for Additive Manufacturing
Series: Journal of Research (NIST JRES)
Report Number: 119.018
Topic: Environment/Climate
Published: 9/16/2014
Authors: John A. Slotwinski, Edward Joseph Garboczi, Paul E Stutzman, Chiara F Ferraris, Stephanie S Watson, Max A Peltz
Abstract: Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts such as those found in aerospace components. The production of AM parts with consistent and predictable properties ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915144

6. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Series: Journal of Research (NIST JRES)
Report Number: 119.019
Topic: Environment/Climate
Published: 9/16/2014
Authors: John A. Slotwinski, Edward Joseph Garboczi, Keith M. Hebenstreit
Abstract: Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these par ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915141

7. Dielectric characterization by microwave cavity perturbation corrected for non-uniform fields
Topic: Environment/Climate
Published: 7/23/2014
Authors: Nathan D Orloff, Jan Obrzut, Christian John Long, Thomas F. Lam, James C Booth, David R Novotny, James Alexander Liddle, Pavel Kabos
Abstract: The non-uniform fields that occur due to the slot in the cavity through which the sample is inserted and those due to the sample geometry itself decrease the accuracy of dielectric characterization by cavity perturbation at microwave frequencies. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915011

8. Applicability of Existing Materials Testing Standards for Additive Manufacturing Materials
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 8005
Topic: Environment/Climate
Published: 7/7/2014
Authors: John A. Slotwinski, Shawn P Moylan
Abstract: This NIST Internal Report (NISTIR) is the third in a series of reports from the National Institute of Standards and Technology (NIST) Engineering Laboratory's project on Additive Manufacturing Materials. This project provides the measurement science ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915143

9. Standards Related to Prognostics and Health Management (PHM) for Manufacturing
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 8012
Topic: Environment/Climate
Published: 7/7/2014
Authors: Gregory W Vogl, Brian A Weiss, M Alkan Donmez
Abstract: Prognostics and health management (PHM) systems are utilized to reduce burdensome maintenance tasks of monitored products or processes through diagnostics and prognostics, which provide actionable information that support decision-making for improved ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915550

10. Effects of Temperature on Surface Accumulation and Release of Silica Nanoparticles in an Epoxy Nanocoating Exposed to UV Radiation
Topic: Environment/Climate
Published: 6/16/2014
Authors: Chun-Chieh Tien, Ching-Hsuan Chang, Bernard Hao-Chih Liu, Deborah L Stanley, Savelas A Rabb, Lee Lijian Yu, Tinh Nguyen, Li Piin Sung
Abstract: Polymer nanocoatings are increasingly used outdoors and in harsh environments. However, because most common polymers degraded by the weathering elements, nanoparticles in polymer nanocoatings may be released into the environments. Such nanoparticle r ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915955



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series