NIST logo

Publications Portal

You searched on:
Topic Area: Environment/Climate
Date range: to 12/01/2007
Sorted by: title

Displaying records 1 to 10 of 306 records.
Resort by: Date / Title


1. 3_D spacial chaos in the elastica and the spinning top: Kirchoff analogy
Topic: Environment/Climate
Published: 1/1/1993
Authors: Matthew A. Davies, F Moon
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820069

2. A Chemically Bonded Aminosilane Stationary Phase for the High-Performance Liquid Chromatographic Separation of Polynuclear Aromatic Compounds
Topic: Environment/Climate
Published: 12/1/1977
Authors: Stephen A Wise, S. N. Chesler, Harry S Hertz, L.R. Hilpert, Willie E May
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901260

3. A New Stable Speed Test Apparatus for Milling
Topic: Environment/Climate
Published: 5/1/2001
Authors: J P Snyder, Jon Robert Pratt, Matthew A. Davies, S J Smith
Abstract: This paper describes a new device that uses a non-contact force actuator in conjunction with spindle rotation to produce an impulsive periodic driving force on the tool at the tooth passing frequency. Measurements are made of the applied and of the ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821878

4. A Novel Cooling System to Reduce Thermally-Induced Errors of Machine Tools
Topic: Environment/Climate
Published: 6/14/2007
Authors: M. Alkan Donmez, Mahn-Hee Hahn, Johannes A Soons
Abstract: This study explores a method to reduce thermally-induced errors of machine tools through temperature stabilization with compressed air. The method uses inexpensive, specialy-shaped, silicon tubing wth small silts. Compressed air forced through such ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822722

5. A Novel Peak Detection Algorithm for Use in the Study of Machining Chip Segmentation
Report Number: 823018
Topic: Environment/Climate
Published: 11/7/2007
Authors: Eric Paul Whitenton, Robert W Ivester, Jarred C. Heigel
Abstract: The study of how metal deforms and flows as parts are machined yields important insights into the metal cutting process. Improvements in high-speed digital imaging and image processing software promise to improve our understanding of the tool-workpie ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823018

6. A Novel Peak Detection Algorithm for Use in the Study of Machining Chip Segmentation
Report Number: 824628
Topic: Environment/Climate
Published: 3/1/2007
Author: Eric Paul Whitenton
Abstract: The study of how metal is deformed (how it flows) as parts are machined yields important insights into the metal cutting process. Recent improvements in both high-speed digital imaging and image processing software promise to improve our understandin ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=824628

7. A Relationship Between Reversed Phase C18 Liquid Chromatographic Retention and the Shape of Polycyclic Aromatic Hydrocarbons
Topic: Environment/Climate
Published: 9/1/1981
Authors: Stephen A Wise, W.J. Bonnett, Franklin R Guenther, Willie E May
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901283

8. A Smart Transducer Interface Standard for Sensors and Actuators
Topic: Environment/Climate
Published: 1/1/2004
Author: Kang B Lee
Abstract: A set of common transducer interfaces has been defined in the family of IEEE 1451, standards for connecting sensors and actuators to microprocessors, control and field networks, and instrumentation systems. The standards also defined the Trans-ducer ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822097

9. A Spline Algorithm for Modeling Cutting Errors on Turning Centers
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6517
Topic: Environment/Climate
Published: 1/1/2000
Authors: David E. Gilsinn, Herbert T Bandy, Alice V. Ling
Abstract: The precision of manufacturing using machine tools depends on the accuracy of the relative position of the cutting tool with respect to the workpiece. Kinematic modeling of machine tools is used to describe this relative position. This motion can b ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821887

10. A Spline Algorithm for Modeling Cutting Errors on Turning Centers
Topic: Environment/Climate
Published: 10/1/2002
Authors: David E. Gilsinn, Herbert T Bandy, Alice V. Ling
Abstract: Turned parts on turning centers are made up of features with profiles defined by arcs and lines. An error model for turned parts must take into account not only individual feature errors but also how errors carry over from one feature to another. In ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821912



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series