NIST logo

Publications Portal

You searched on: Topic Area: Energy Sorted by: date

Displaying records 61 to 70 of 405 records.
Resort by: Date / Title


61. Confocal Microscopy Analysis of Breech Face Marks on Fired Cartridge Cases from Ten Consecutively Manufactured Pistol Slides
Topic: Energy
Published: 7/1/2012
Authors: Xiaoyu A Zheng, Robert Meryln Thompson, Todd Weller
Abstract: Ten (10) pistol slides with consecutively manufactured breech faces, were obtained from Sturm, Ruger Co, Inc. A total of nine (9) test fires from each pistol, for a total of ninety (90) test fired cartridge cases, were compared using comparison micr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906690

62. Johnson Noise Thermometry Measurement of the Boltzmann Constant with a 200 Ohm Sense Resistor
Topic: Energy
Published: 7/1/2012
Authors: Alessio Pollarolo, Tae H. Jeong, Samuel Paul Benz, Horst Rogalla
Abstract: In 2010 NIST measured the Boltzmann constant k by use of an electronic technique that measured the Johnson noise of a 100 Ohm resistor at the triple point of water (TPW). The NIST Johnson noise thermometry (JNT) system used as a reference a voltage ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910628

63. A versatile light-emitting-diode-based spectral response measurement system for photovoltaic device characterization
Topic: Energy
Published: 6/29/2012
Authors: Behrang H Hamadani, John F Roller, Brian P Dougherty, Howard W Yoon
Abstract: An absolute differential spectral response measurement system for solar cells is presented. The system couples an array of light emitting diodes (LEDs) with an optical waveguide to provide large area illumination. Two unique yet complementary measur ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910849

64. Detection of Cutting Phenomena Using Sensor Fusion
Topic: Energy
Published: 6/8/2012
Authors: John A. Slotwinski, Gregory W Vogl, Robert W Ivester, Ian Younker
Abstract: This paper presents an investigation of the application of a suite of sensors for simultaneous in-situ measurements of machining processes. While not every individual sensor responds to all machining phenomena, the suite of sensors together responds ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910758

65. Mechanical Properties of High Strength Fibers Used in Soft Body Armors
Topic: Energy
Published: 6/8/2012
Authors: Haruki Kobayashi, Jae Hyun Kim, Walter G McDonough, Amanda Lattam Forster, Kirk D Rice, Ryuichi Akiyama, Katsufumi Tanaka, Gale Antrus Holmes
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911058

66. Application of the Advanced Distillation Curve Method to the Variability of Jet Fuels
Topic: Energy
Published: 5/24/2012
Authors: Jessica Lynne Burger, Thomas J Bruno
Abstract: In this paper, we report the application of the advanced distillation-curve approach to the gas turbine fuels Jet-A, JP-8, and JP-5, in order to obtain information about the variability of these gas turbine fuels. The measurements of the temperatures ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910865

67. Inelastic Neutron Scattering on Polymer Electrolytes for Lithium-Ion Batteries
Topic: Energy
Published: 5/7/2012
Authors: Huagen H. Peng, Madhusudan Tyagi, Kirt Anthony Page, Christopher L Soles
Abstract: The relationship between ion transport and polymer dynamics is central to the pursuit of solid polymer electrolytes for lithium batteries. This understanding is critical to achieve solid polymer electrolyte systems of sufficiently high ion conductiv ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910506

68. CYCLE_D: NIST Vapor Compression Cycle Design Program Version 5.0
Topic: Energy
Published: 5/1/2012
Authors: J S Brown, Piotr A Domanski, Eric W Lemmon
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909960

69. A strategy for testing product conformance to geometric dimensioning & tolerancing standards
Topic: Energy
Published: 4/20/2012
Authors: Simon Paul Frechette, Bryan R Fischer
Abstract: Geometric Dimensioning and tolerance (GD&T) information is created as part of the design process. Today, that process is performed using computer-aided design systems, which generate 3D digital product models. GD&T is created and stored as an integra ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911123

70. OVERVIEW OF THE TESTING PROGRAM ON FIBERS USED IN BALLISTIC APPLICATIONS
Topic: Energy
Published: 4/4/2012
Authors: Walter G McDonough, Amanda Lattam Forster, Haruki Kobayashi, Jae Hyun Kim, Michael A Riley, Joy P Dunkers, Scott A Wight, Kirk D Rice, Gale Antrus Holmes
Abstract: The goal of this paper and presentation is to give an overview of the research effort to date being conducted at the National Institute of Standards and Technology on polymeric fibers used in soft body armor (SBA) and a discussion of future direction ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909943



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series