NIST logo

Publications Portal

You searched on: Topic Area: Energy

Displaying records 31 to 40 of 405 records.
Resort by: Date / Title

31. Validation Tests for the Congruent Matching Cells (CMC) Method Using Cartridge Cases Fired With Consecutively Manufactured Pistol Slides
Topic: Energy
Published: 10/17/2013
Authors: Wei Chu, Mingsi Tong, Jun-Feng Song
Abstract: The National Institute of Standards and Technology (NIST) has developed the NIST Ballistics Identification System (NBIS) based on three-dimensional (3D) topography measurements on correlation cells [1]. The Congruent Matching Cells (CMC) method is u ...

32. Effect of Concentration on R134a/Al2O3 Nanolubricant Mixture Boiling on a Reentrant Cavity Surface with Extensive Measurement and Analysis Details
Series: Technical Note (NIST TN)
Report Number: 1813
Topic: Energy
Published: 9/25/2013
Author: Mark A Kedzierski
Abstract: This paper quantifies the influence of Al2O3 nanoparticles on the pool boiling performance of R134a/polyolester mixtures on a Turbo-BII-HP boiling surface. Nanolubricants with 10 nm diameter Al2O3 nanoparticles of various volume fractions (1.6 %, 2. ...

33. Improvements to the Johnson Noise Thermometry System for Measurements at 505 ‹ 800 K
Topic: Energy
Published: 9/12/2013
Authors: Weston Leo Tew, Kazuaki Yamazawa, Samuel Paul Benz, Alessio Pollarolo, Horst Rogalla, Paul David Dresselhaus
Abstract: The National Institute of Standards and Technology (NIST) is currently using Johnson noise thermometry (JNT) to determine the deviations of the International Temperature Scale of 1990 (ITS-90) from the thermodynamic temperature in the range of 505‹93 ...

34. Development of a Quantum-Voltage-Calibrated Noise Thermometer at NIM
Topic: Energy
Published: 9/11/2013
Authors: Jifeng Qu, Samuel Paul Benz, Jianqiang Zhang, Horst Rogalla, Yang Fu, Alessio Pollarolo, Jintao Zhang
Abstract: A quantum-voltage-calibrated Johnson-noise thermometer was developed at NIM, which measures the Boltzmann constant k through comparing the thermal noise across a 100  sense resistor at the temperature of the triple point water to the comb-lik ...

35. Johnson-noise thermometry based on a quantized-voltage noise source at NIST
Topic: Energy
Published: 9/11/2013
Authors: Alessio Pollarolo, Tae H. Jeong, Samuel Paul Benz, Paul David Dresselhaus, Horst Rogalla, Weston Leo Tew
Abstract: Johnson Noise Thermometry is an electronic approach to measuring temperature. For several years, NIST has been developing a switching-correlator-type Johnson-noise thermometer that uses a quantized voltage noise source as an accurate voltage referenc ...

36. Time-resolved surface infrared spectroscopy during atomic layer deposition
Topic: Energy
Published: 9/10/2013
Authors: Brent A Sperling, John J. Hoang, William Andrew Kimes, James E Maslar
Abstract: This work presents a novel method for obtaining surface infrared spectra with sub-second time resolution during atomic layer deposition (ALD). Using a rapid-scan Fourier transform infrared (FT-IR) spectrometer, we obtain a series of interferograms ( ...

37. Theory and Algorithms for Weighted Total Least-Squares Fitting of Lines, Planes, and Parallel Planes to Support Tolerancing Standards
Topic: Energy
Published: 8/16/2013
Authors: Craig M Shakarji, Vijay Srinivasan
Abstract: We present the theory and algorithms for fitting a line, a plane, two parallel planes (corresponding to a slot or a slab) or many parallel planes in a total (orthogonal) least-squares sense to coordinate data that is weighted. Each of these problems ...

38. Soft X-ray Characterization of DSA Block Copolymers
Topic: Energy
Published: 8/12/2013
Authors: Daniel Franklin Sunday, Wen-Li Wu, Regis J Kline

39. 3D X-ray Metrology for Block Copolymer Lithography Line-Space Patterns
Topic: Energy
Published: 7/15/2013
Authors: Daniel Franklin Sunday, Matthew R. Hammond, Chengqing C. Wang, Wen-Li Wu, Regis J Kline, Gila E. Stein
Abstract: We report on the development of a new measurement method, resonant critical-dimension small-angle x-ray scattering (CD-SAXS), for the characterization of the buried structure of block copolymers (BCP) used in directed self assembly (DSA). We use reso ...

40. Absolute spectral responsivity measurements of solar cells by a hybrid optical technique
Topic: Energy
Published: 7/15/2013
Authors: Behrang H Hamadani, John F Roller, Brian P Dougherty, Fiona Persaud, Howard W Yoon
Abstract: An irradiance mode, absolute differential spectral response measurement system for solar cells is presented. The system is based on combining the monochromator-based approach of determining the power mode spectral responsivity of cells with an LED-b ...

Search NIST-wide:

(Search abstract and keywords)

Last Name:
First Name:

Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series