NIST logo

Publications Portal

You searched on:
Topic Area: Energy

Displaying records 281 to 290 of 394 records.
Resort by: Date / Title


281. Viscoelastic Characterization of Polymers Using Instrumented Indentation II. Dynamic Testing
Topic: Energy
Published: 7/13/2005
Authors: Christopher C White, Mark R VanLandingham, P L Drzal, N-K Chang, S-H Chang
Abstract: Dynamic nanoindentation was preformed on a cured epoxy, poly(methyl methacrylate), and poly(dimethyl siloxane) or PDMS. These samples, two glassy polymers and a rubbery material are used to illustrate the agreement between classical rheological instr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860508

282. HiCASS Target Tracking Sensor Study
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7220
Topic: Energy
Published: 5/20/2005
Author: Richard J Norcross
Abstract: The High Capacity Alongside Sea base Sustainment (HiCASS) program intends to generate substantial improvements in skin-to-skin at-sea replenishment. HiCASS requires real-time tracking and dynamic load position sensing.
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823534

283. Performance Metrics for Intelligent Systems, Proceedings of PerMIS '04 Workshop
Series: Special Publication (NIST SP)
Report Number: 1036
Topic: Energy
Published: 5/15/2005
Authors: Elena R Messina, A Meystel
Abstract: This is the collection of papers presented at the Performance Metrics for Intelligent Systems Workshop, held at NIST on August 24, 25, and 26, 2004. This was the fifth workshop in a series focused on both theoretical and practical measures of perform ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823549

284. Influence of Experimental Set-Up and Plastic Deformation on the Shaft-Loaded Blister Test
Topic: Energy
Published: 5/11/2005
Authors: S Goldfarb, E P O'Brien, Christopher C White
Abstract: The effect of film thickness, substrate hole diameter, and shaft tip diameter on the applied strain energy release rate, G, of a thin film was measured using the shaft-loaded blister test. Test specimens consisted of plies of Kapton pressure sensiti ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860588

285. Hierarchical Control and Performance Evaluation of Multi-Vehicle Autonomous Systems
Topic: Energy
Published: 5/4/2005
Authors: Stephen B. Balakirsky, Christopher J. Scrapper Jr, Elena R Messina
Abstract: This paper will describe how the Mobility Open Architecture Tools and Simulation (MOAST) framework can facilitate performance evaluations of RCS compliant multi-vehicle autonomous systems. This framework provides an environment that allows for simula ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823546

286. Design, Development and Testing of a Hybrid Device for In-Situ Testing of Sealant
Topic: Energy
Published: 1/19/2005
Authors: Christopher C White, E Embree, C Buch
Abstract: A new hybrid in-situ sealant-testing device that uses movement to both characterize and fatigue standard ASTM C719 sealant samples is described. This five sample device, records the force-response data for every deformation cycle of every sample. F ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860378

287. Design Optimization for a Parallel MEMS Mechanism with Flexure Joints
Topic: Energy
Published: 10/4/2004
Authors: Byoung H Kang, J Wen, Nicholas G Dagalakis, Jason John Gorman
Abstract: This paper presents an analysis tool and design method forMEMS parallel mechanisms. Due to processing constraints inMEMS fabrication, flexure joints are frequently used in MEMSmechanisms. Flexure joints offer advantages over other joint designdue to ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822367

288. Application of a Crash Prevention Boundary Metric to a Road Departure Warning System
Topic: Energy
Published: 8/25/2004
Authors: Sandor S. Szabo, B H Wilson
Abstract: The U.S. Department of Transportation is actively involved in assessing the benefit of road departure warning systems (RDWS). A crash prevention boundary (CPB) metric has been proposed as one means of objectively measuring system performance. This pa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822504

289. Obstacle Detection Using a Time-of-Flight Range Camera for Indoor Automated Guided Vehicle Navigation
Topic: Energy
Published: 8/1/2004
Authors: Roger V Bostelman, Tsai Hong Hong, Rajmohan Madhavan
Abstract: The performance evaluation of an obstacle detection and segmentation algorithm for Automated Guided Vehicle (AGV) navigation in factory-like environments using a 3D real-time range camera is the subject of this paper.  Our approach has been test ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823512

290. Analysis and Design of Parallel Mechanisms with Flexure Joints
Topic: Energy
Published: 7/15/2004
Authors: Byoung H Kang, J Wen, Nicholas G Dagalakis, Jason John Gorman
Abstract: Flexure joints are frequently used in precision motion stages and micro-robotic mechanisms due lo their monolithic construction. The joint compliance, howeyer, can affect the static and dynamic performance of the overall mechanism. In this paper, we ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822663



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series