NIST logo

Publications Portal

You searched on: Topic Area: Nanofabrication, Nanomanufacturing, and Nanoprocessing Sorted by: date

Displaying records 1 to 10 of 43 records.
Resort by: Date / Title


1. Process Optimization for Lattice-Selective Wet Etching of Crystalline Silicon Structures
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 3/9/2016
Authors: Ronald G Dixson, William F Guthrie, Richard A Allen, Ndubuisi George Orji, Michael W. Cresswell, Christine E. Murabito
Abstract: Lattice-selective etching of silicon is used in a number of applications, but it is particularly valuable in those for which the lattice-defined sidewall angle can be beneficial to the functional goals. A relatively small but important niche applica ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919919

2. Rolled-Up Nanoporous Membranes by Nanoimprint Lithography and Strain Engineering
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 4/7/2015
Authors: Jaehyun Park, ChangKyu Yoon, Qianru Jin, Lei Chen, David H Gracias
Abstract: It is extremely challenging to enable nanoscale patterning in three dimensional (3D) curved geometries using conventional nanolithographic approaches. In this paper, we describe a highly parallel approach that combines nanoimprint lithography (NIL) a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917673

3. Shape-changing magnetic assemblies as high-sensitivity NMR-readable nanoprobes
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 4/2/2015
Authors: Gary Zabow, Stephen Dodd, Alan Koretsky
Abstract: Fluorescent and plasmonic probes have proven invaluable in the life sciences, but function poorly in optically inaccessible regions. Here we present radio-frequency addressable analogs that afford sensing opportunities similar to those of fluorescent ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917493

4. Challenges, Strategies and Opportunities for Measuring Carbon Nanotubes within a Polymer Composites by X-ray Photoelectron Spectroscopy
Series: Special Publication (NIST SP)
Report Number: 1200-10
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 3/14/2015
Authors: Justin M Gorham, Jeremiah W Woodcock, Keana C K Scott
Abstract: FOREWORD This NIST Special Publication (SP) is one in a series of NIST SPs that address research needs articulated in the National Nanotechnology Initiative (NNI) Environmental, Health, and Safety Research Strategy published in 2011 [1]. This ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917794

5. Preparation of silver nanoparticle loaded cotton threads to facilitate measurement development for textile applications
Series: Special Publication (NIST SP)
Report Number: 1200-8
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 1/26/2015
Authors: Justin M Gorham, Karen E Murphy, Jingyu Liu, Dimitri Tselenchuk, Gheorghe Stan, Thao M. Nguyen, Richard D Holbrook, Michael R Winchester, Robert Francis Cook, Robert MacCuspie, Vincent A Hackley
Abstract: FOREWORD This NIST special publication (SP) is one in a series of NIST SPs that address research needs articulated in the National Nanotechnology Initiative (NNI) Environmental, Health, and Safety Research Strategy published in 2011 [1]. This ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916567

6. GaN nanowire coated with atomic layer deposition of tungsten: a probe for near-field scanning microwave microscopy
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 9/26/2014
Authors: Joel C Weber, Paul T Blanchard, Aric Warner Sanders, Jonas Gertsch, Steven George, Samuel Berweger, Atif A. Imtiaz, Thomas M Wallis, Kristine A Bertness, Pavel Kabos, Norman A Sanford, victor bright
Abstract: We report on the fabrication of a GaN nanowire probe for near-field scanning microwave microscopy. The probe has a capacitive resolution of ~0.03 fF, surpassing that of a commercial Pt tip. Imaging of MoS2 sheets found the probe to be immune to ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916071

7. Pattern Transfer of Hydrogen Depassivation Lithography Patterns into Silicon with Atomically Traceable Placement and Size Control
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 7/17/2014
Authors: Josh Ballard, Stephen McDonnell, Don Dick, Maia Bischof, Joseph Fu, D Jaeger, James Owen , w Owen, Justin Alexander, Udi Fuchs, Pradeep Narayanan Namboodiri, Kai Li, John Randall, Robert Wallace, Yves Chabal, Richard Reidy, Richard M Silver
Abstract: Reducing the scale of etched nanostructures below the 10 nm range eventually will require an atomic scale understanding of the masks being used in order to maintain exquisite control over both feature size and feature density. Here, we demonstrate a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915583

8. Optical volumetric inspection of sub-20 nm patterned defects with wafer noise
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 4/2/2014
Authors: Bryan M Barnes, Francois R. Goasmat, Martin Y Sohn, Hui Zhou, Richard M Silver, Andras Vladar, Abraham Arceo
Abstract: We have previously introduced a new data analysis method that more thoroughly utilizes scattered optical intensity data collected during defect inspection using bright-field microscopy. This volumetric approach allows conversion of focus resolved 2-D ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915807

9. Controlled Formation and Characterization of Dithiothreitol-Conjugated Gold Nanoparticle Clusters
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 3/5/2014
Authors: De-Hao D. Tsai, Tae Joon Cho, Frank W DelRio, Justin M Gorham, Jiwen Zheng, Jiaojie Tan, Michael Russel Zachariah, Vincent A Hackley
Abstract: We report a systematic study of the controlled formation of discrete-size gold nanoparticle clusters (GNCs) by interaction with the reducing agent dithiothreitol (DTT). Asymmetric-flow field flow fractionation and electrospray differential mobility a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915014

10. Strong Casimir force reduction by metallic surface nanostructuring
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 9/27/2013
Authors: Francesco Intravaia, Stefan T. Koev, Il Woong Jung, Albert A. Talin, Paul S Davids, Ricardo Decca, Vladimir A Aksyuk, Diego A. R. Dalvit, Daniel Lopez
Abstract: The Casimir force is a quantum-mechanical interaction arising from vacuum fluctuations of the electromagnetic (EM) field and is technologically significant in micro- and nanomechanical systems. Despite rapid progress in nanophotonics, the goal of e ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910133



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series