NIST logo

Publications Portal

You searched on:
Topic Area: Nanofabrication, Nanomanufacturing, and Nanoprocessing

Displaying records 21 to 30 of 96 records.
Resort by: Date / Title


21. O2 A-band line parameters to support atmospheric remote sensing. Part II: The rare isotopologues
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 7/21/2011
Authors: Joseph Terence Hodges, David A Long, Daniel K Havey, S. S. Yu, M Okumura, Charles E Miller
Abstract: Frequency-stabilized cavity ring-down spectroscopy (FS-CRDS) was employed to measure over 100 transitions in the R-branch of the b1Σg+←X3Σg-(0,0) band for the rare O2 isotopologues. The use of 17O- and 18O-enriched mixtures allowed fo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907932

22. Characterization of the non-uniform reaction in chemically-amplified calix[4]resorcinarene molecular resist thin films
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 7/19/2011
Authors: Vivek M Prabhu, Shuhui Kang, Regis J Kline, Dean M DeLongchamp, Daniel A Fischer, Wen-Li Wu, Sushil K Satija, Jing Sha, Christopher K. Ober, Peter V. Bonnesen
Abstract: The ccc stereoisomer-purified tert-butoxycarbonyloxy (t-Boc) protected calix[4]resorcinarene molecular resists blended with photoacid generator exhibit a non-uniform photoacid catalyzed reaction in thin films. The surface displays a reduced reaction ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908683

23. Small fluctuations in epitaxial growth via conservative noise
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 7/7/2011
Authors: Paul Nathan Patrone, Rongrong Wang, Dionisios Margetis
Abstract: We study the combined effect of growth (material deposition from above) and nearest-neighbor entropic and force-dipole interactions in a stochastically perturbed system of N line defects (steps) on a vicinal crystal surface in 1+1 dimensions. Firs ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908523

24. Guided three-dimensional catalyst folding during Metal assisted Chemical Etching of Silicon
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 6/28/2011
Authors: Konrad Rykaczewski, Owen J. Hildreth, Ching P. Wong, Andrei G. Fedorov, John Henry j Scott
Abstract: In order to fabricate truly complex three-dimensional (3D) silicon nanostructures fabrication methods which expand beyond the concept of creation of straight 3D structures by direct extension of two dimensional (2D) patterns need to be developed. In ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908006

25. Hydrodynamic Fractionation of Finite Size Nano Gold Clusters
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 6/15/2011
Authors: De-Hao D. Tsai, Tae Joon Cho, Frank W DelRio, Julian S. Taurozzi, Michael Russel Zachariah, Vincent A Hackley
Abstract: We demonstrate a high resolution in situ experimental method for performing simultaneous size-classification and characterization of functional nanoscale gold clusters (NGCs) based on asymmetric-flow field flow fractionation (AFFF). Field emission sc ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908232

26. Methodology for imaging of nano-to-microscale water condensation dynamics on complex nanostructures
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 6/11/2011
Authors: Konrad Rykaczewski, John Henry j Scott
Abstract: By transferring of a small part of a macroscale sample to a novel thermally insulated sample platform we are able to mitigate flooding and electron heating problems typically associated with Environmental Scanning Electron Microscopy imaging of water ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908396

27. Fabrication and characterization of silicon-based molecular electronic devices
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 5/21/2011
Authors: Christina Ann Hacker, Michael A Walsh, Sujitra Jeanie Pookpanratana, Mariona Coll Bau, Curt A Richter
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908433

28. Flip Chip Lamination to electrically contact organic single crystals on flexible substrates
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 4/20/2011
Authors: Oana Jurchescu, Brad Conrad, Christina Ann Hacker, David J Gundlach, Curt A Richter
Abstract: The fabrication of top metal contacts for organic electronics represents a challenge and has important consequences for electrical properties of such systems. We report a low cost and non-destructive printing process, Flip Chip Lamination (FCL), to f ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907524

29. Effects of shape distortions and imperfections on mode frequencies and collective linewidths in nanomagnets
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 3/28/2011
Authors: Hans Toya Nembach, Justin M Shaw, Thomas J Silva, Ward L Johnson, Sudook A Kim, Robert D McMichael, Pavel Kabos
Abstract: We used Brillouin light scattering to show that shape distortions in Ni80Fe20 nanoelements can have a dramatic effect on the measured linewidth of certain modes. By intentionally introducing an amount of ,egg-likeŠ shape distortion to an ideal ellip ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907044

30. Modeling the transfer of line edge roughness from an EUV mask to the wafer
Topic: Nanofabrication, Nanomanufacturing, and Nanoprocessing
Published: 3/25/2011
Authors: Gregg M. Gallatin, Patrick Naulleau
Abstract: Contributions to line edge roughness (LER) from extreme ultraviolet (EUV) masks have recently been shown to be an issue of concern for both the accuracy of current resist evaluation tests as well the ultimate LER requirements for the 22 nm production ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908144



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series