NIST logo

Publications Portal

You searched on:
Topic Area: Polymers
Sorted by: title

Displaying records 511 to 520 of 550 records.
Resort by: Date / Title


511. The Effect of Non-Linear Viscoelasticity on Interfacial Shear Strength Measurements
Topic: Polymers
Published: 1/1/2000
Authors: Gale Antrus Holmes, R C Petersen, Donald Lee Hunston, Walter G McDonough, C L Schutte
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853657

512. The Effect of Temperature on the Morphology and Kinetics of Surface Pattern Formation in Thin Block Copolymer Films
Topic: Polymers
Published: 10/29/2007
Authors: A P Smith, Jack F Douglas, Eric J. Amis, Alamgir Karim
Abstract: Hole formation and size evolution on the surface of thin films of symmetric diblock copolymers is simultaneously investigated as a function of time, t, temperature, T, and film thickness, h. The hole size h approaches a steady state value at long ti ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852729

513. The Effects of Melt Processing Conditions on the Quality of Poly(ethylene terephthalate) Montmorillonite Clay Nanocomposites
Topic: Polymers
Published: 1/1/2002
Authors: Cher H. Davis, L J Mathias, Jeffrey W Gilman, D A Schiraldi, J R Shields, Paul C Trulove, T E Sutto, H X DeLong
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853734

514. The Effects of Steady Shear on the Order and Orientation of a Diblock Copolymer Melt using In-Situ Small-Angle Neutron Scattering
Topic: Polymers
Published: 1/1/1999
Authors: K A Barnes, F A Morrison, A Nakatani, J W Mays
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853684

515. The Forms and Functions of Complex Nanofluidic Surfaces
Topic: Polymers
Published: 9/14/2010
Authors: Samuel M Stavis, Elizabeth A Strychalski, Jon C Geist, Laurie E Locascio, Michael Gaitan
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907053

516. The Influence of Electrospray Deposition in Matrix-assisted Laser Desorption/Ionization Mass Spectrometry Sample Preparation for Synthetic Polymers
Topic: Polymers
Published: 5/1/2004
Authors: S Wetzel, Charles Martin Guttman, Kathleen M. Flynn
Abstract: Three polymers of differing thermal stability, polystyrene (PS), polyethylene glycol (PEG), and polypropylene glycol (PPG) were studied by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) as the electro-spray deposition voltag ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852286

517. The Influence of Laser Energy of MALDI on the Molecular Mass Distribution of Synthetic Polymers
Topic: Polymers
Published: 5/1/2001
Authors: S Wetzel, Charles Martin Guttman, Kathleen M. Flynn
Abstract: The desorption/ionization process of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) is not completely understood. Characterization of synthetic polymers by MALDI-TOF-MS is very sensitive to the instrument ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851893

518. The Influence of Molecular Architecture and Solvent Type on the Size and Structure of Poly (Bezyl Ether) Dendrimers by SANS
Topic: Polymers
Published: 4/1/2001
Authors: G Evmenenko, Barry J. Bauer, R Kleppinger, B Forier, W Dehaen, Eric J. Amis, N Mischenko, H Reynaers
Abstract: The size of poly(benzyl ether) dendrimers with different molecular architectures was measured by small angle neutron scattering (SANS). Both polar and non-polar solvents were used to measure the effect of solvent type. The radius of gyration (Rg) o ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851667

519. The Influence of Molecular Architecture and Solvent Type on the Size and Structure of Poly(Benzyl Ether) Dendrimers by SANS
Topic: Polymers
Published: 1/1/2001
Authors: G Evmenenko, Barry J. Bauer, R Kleppinger, B Forier, W Dehaen, Eric J. Amis, N Mischenko, H Reynaers
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853754

520. The Influence of Shearing Parameters on the Frictional Forces Measured Between Polymer Brushes
Topic: Polymers
Published: 1/1/2003
Authors: Aaron M Forster, S. Michael Kilbey
Abstract: Polymer brushes have potential as end-tethered lubricants. Brush layers immersed in a good solvent must be compressed to ~16% of their equilibrium height before friction forces are measured. The same experiment in a solvent near the theta temperatu ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852119



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series