NIST logo

Publications Portal

You searched on: Topic Area: Polymers

Displaying records 471 to 480 of 554 records.
Resort by: Date / Title


471. The Influence of Molecular Architecture and Solvent Type on the Size and Structure of Poly(Benzyl Ether) Dendrimers by SANS
Topic: Polymers
Published: 1/1/2001
Authors: G Evmenenko, Barry J. Bauer, R Kleppinger, B Forier, W Dehaen, Eric J. Amis, N Mischenko, H Reynaers
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853754

472. Tri-a-napthylbenzene as a Glassy or Crystaline Matrix for MALDI TOF MS of Synthetic Polymers
Topic: Polymers
Published: 1/1/2001
Authors: Barry J. Bauer, Charles Martin Guttman, William R. Blair, Da-Wei Liu
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853747

473. Determination of the Dielectric Constant of Nanoparticles. I. Dielectric Measurements of Buckminsterfullerene Solutions
Topic: Polymers
Published: 11/1/2000
Authors: Chad R Snyder, Jack F Douglas
Abstract: The static dielectric constant {epsilon} of buckminsterfullerene C^d60^ particles is determined in cis-decalin, toluene, and 1,2-dichlorobenzene using continuum models for spherical and sherical shell inclusions. The value for {epsilon} for isolated ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851739

474. Electrostriction Mechanism in Electron-Irradiated Ferroelectric Copolymer: a Frequency Response Model
Topic: Polymers
Published: 10/1/2000
Authors: E Balizer, Fred B Bateman, A S DeReggi, Dan A Neumann
Abstract: The time-resolved optical measurement of the electrostrictive strain of an electron-irradiated copolymer of vinylidene fluoride with trifluoroethylene produced by a voltage step reveals a short risetime response followed by a decay with a one secon ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851780

475. SANS Study of Sulfonate End Group Effect on Polystyrene Self-Diffusion
Topic: Polymers
Published: 10/1/2000
Authors: S D Kim, A Klein, L H Sperling, E M Boczar, Barry J. Bauer
Abstract: Film formation from a latex involves interdiffusion of the polymer chains. The interdiffusion behavior of polystyrene with H-ends, one sulfite-end, and two sulfite-ends are compared via small-angle neutron scattering (SANS) and a direct nonradiative ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851738

476. An Improved Synthesis of Ethyl Alpha-Hydroxymethylacrylate, a Unique Isomeric Analog of HEMA
Topic: Polymers
Published: 8/1/2000
Authors: Joseph M Antonucci, J W Stansbury, Bruce Owen Fowler
Abstract: HEMA is widely used in dental adhesives, bioactive composites and resin-modified glass ionomer cements. In its polymeric forms it is used in a number of biomedical applications, e.g. hydrogels for controlled-release, soft contact lenses, vascular gr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851708

477. Atomic Force Microscopy Studies of Phase Ordering in Polymer Blends and Clay-Filled Systems
Topic: Polymers
Published: 8/1/2000
Authors: V Ferreiro, Jack F Douglas, Alamgir Karim, G Coulon
Abstract: Many industrial applications require a control of the morphology of thin polymer films. The morphology of thin polymer films depends on many factors : method of formation, tendency of film components to mix or dewet, the crystallization of film comp ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851730

478. Dendrimer Templates for the Formation of Gold Nanoclusters
Topic: Polymers
Published: 8/1/2000
Authors: Franziska Grohn, Barry J. Bauer, Y A Akpalu, C L. Jackson, Eric J. Amis
Abstract: Charged poly(amidoamine) (PAMAM) dendrimers are used to create organic-inorganic hybrid colloids in aqueous solution. The formation of gold colloids upon reduction of a gold salt precursor serves as a model reaction to study the influence of reaction ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851679

479. Numerical Simulation of Liquid Composite Injection/Compression Moding. Part 1: Mesh Generation
Topic: Polymers
Published: 6/14/2000
Authors: K M Pillai, C L Tucker, Frederick R Phelan Jr
Abstract: This paper presents a numerical simulation of the injection/compression type of liquid composite molding (LCI/CM), where the fiber preform is compressed to a desired degree at the same time as the resin is being injected into the mold. Due to the po ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851464

480. Critical Issues in the Characterization of Polymers for Medical Applications
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6535
Topic: Polymers
Published: 6/1/2000
Authors: Walter G McDonough, Eric J. Amis, J Kohn
Abstract: On June 14, 2000, the New Jersey Center for Biomaterials and the Polymers Division of the National Institute of Standards and Technology (NIST) co-sponsored a one-day workshop on Critical Issues in the Characterization of Polymers for Medical Applica ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851793



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series