NIST logo

Publications Portal

You searched on: Topic Area: Metals

Displaying records 11 to 20 of 39 records.
Resort by: Date / Title


11. Spin transport parameters in metallic multilayers determined by ferromagnetic resonance measurements of spin-pumping
Topic: Metals
Published: 4/19/2013
Authors: Carl T. Boone, Hans Toya Nembach, Justin M Shaw, Thomas J Silva
Abstract: We measured spin-transport in nonferromagnetic (NM) metallic multilayers from the contribution to damping due to spin pumping from a ferromagnetic Co^d90^Fe^d10^ thin film. The multilayer stack consisted of NM^d1^/NM^d2^/Co^d90^Fe^d10^(2 nm)/NM^d2^/N ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912988

12. Repeatability and reproducibility of compression strength measurements conducted according to ASTM E9
Series: Technical Note (NIST TN)
Report Number: 1679
Topic: Metals
Published: 2/14/2013
Authors: William E Luecke, Stephen Graham, Matthew Adler, Li Ma
Abstract: Ten commercial laboratories participated in an interlaboratory study to establish the repeatability and reproducibility of compression strength tests conducted according to ASTM International Standart Test Method E9. The test employed a cylindric ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906739

13. Crystal Plasticity Analysis of Constitutive Behavior of 5754 Aluminum Sheet Deformed Along Bi-Linear Strain Paths
Topic: Metals
Published: 12/1/2012
Authors: Mark A Iadicola, Lin Hu, Anthony D Rollett, Timothy J Foecke
Abstract: Sheet specimens of 5754 aluminum alloy were deformed along a series of bi-linear,equal-biaxial and uniaxial, strain paths while simultaneously measuring stress-strain behavior. Using the measured crystallographic texture before and after deformation, ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906865

14. Fatigue Flaw NDE Reference Standard Development - Phase I Feasibility Study
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7902
Topic: Metals
Published: 11/1/2012
Authors: Mark D. Richards, Joseph David McColskey, Timothy S Weeks
Abstract: A feasibility study was performed to evaluate a novel method of accurately fatigue cracking steel plates to generate fatigue proposed fatigue crack reference standards. Fatigue cracks were introduced into low carbon steel reference plates in whi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910315

15. Identifying the Dynamic Compressive Stiffness of a Prospective Biomimetic Elastomer by an Inverse Method
Topic: Metals
Published: 5/14/2012
Authors: Steven P Mates, Aaron M Forster, Donald Hunston, Richard Everett, Kirth Simmonds, Amit Bagchi
Abstract: Elastomeric materials that mimic real soft human tissues are sought to provide realistic experimental devices to simulate the human body‰s response to concussive loading so that better protective equipment can be developed. Tissue injury occurs under ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909134

16. Validating classical line profile analyses using microbeam diffraction from individual dislocation cell walls and cell interiors
Topic: Metals
Published: 4/1/2012
Authors: Lyle E Levine, P. Geantil, B C. Larson, Jonathan Tischler, Michael E. Kassner, Wenjun Liu
Abstract: Dislocation structures in deformed metals produce broad, asymmetric diffraction line profiles. During analysis, these profiles are generally separated into two nearly symmetric subprofiles corresponding to dislocation cell walls and cell interiors. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909490

17. Curved-Wide-Plate Test Protocol and Results
Topic: Metals
Published: 1/25/2012
Author: Timothy S Weeks
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909776

18. Small Scale Tensile, Charpy V-Notch, and Fracture Toughness Tests
Topic: Metals
Published: 1/25/2012
Authors: Enrico Lucon, Timothy S Weeks, James Gianetto, W. R. Tyson, D. Y. Park, G Shen, Marie A Quintana, V. B. Rajan, Yong-Yi Wang
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909627

19. Implications of the choice of interatomic potential on planar faults and surface properties in nickel
Topic: Metals
Published: 9/21/2011
Authors: Chandler A Becker, Francesca M Tavazza, Lyle E Levine
Abstract: With the increasing use of molecular simulation to understand deformation mechanisms in transition metals, it is important to assess how well the simulations capture behavior both near equilibrium and under more extreme conditions. In particular, it ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906781

20. Electron Transport in Gold Nanowires: Stable 1-, 2- and 3-Dimensional Atomic Structures and Non-Integer Conduction States
Topic: Metals
Published: 9/14/2011
Authors: Francesca M Tavazza, Douglas T Smith, Lyle E Levine, Jon Robert Pratt, Anne M. Chaka
Abstract: Experimental conductivity measurements made during highly stable tensile deformation of Au nanowires show a rich variety of behaviors, including non-integer quantum conductance plateaus, transitions and slopes. Using tight binding conductance cal ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906808



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series