NIST logo

Publications Portal

You searched on: Topic Area: Ceramics Sorted by: title

Your search results exceeded 1,000 records. Please refine your search and try again.
Displaying records 971 to 980 of 1000 records.
Resort by: Date / Title

971. The Nature and Origin of Tribochemistry
Topic: Ceramics
Published: 8/1/2002
Authors: Stephen M. Hsu, J Zhang, Z Yin
Abstract: The origin of tribochemistry is from the rubbing of surfaces together. The precise nature of the chemical reactions and the driving force behind the reactions are not known except for a few simple chemical systems. In boundary lubrication, it is di ...

972. The Nucleation of Atomic Layer Deposited HfO2 Films, and Evolution of Their Microstruture, Studied by Grazing Incidence Small Angle X-ray Scattering Using Synchrotron Radiation
Topic: Ceramics
Published: 1/16/2006
Authors: Martin L Green, Andrew John Allen, Xiang Li, Junling Wang, J Ilavsky, A Delabie, R Puurunen, B Brijs

973. The Orientation of Semifluorinated Alkanes Attached to Polymers at the Surface of Polymer Films
Topic: Ceramics
Published: 3/1/2000
Authors: Jan Genzer, E Sivaniah, E K Kramer, J G Wang, H Kerner, M Xiang, K Char, Christopher K. Ober, B M DeKoven, Robert A Bubeck, M K Chaudhury, S Sambasivan, Daniel A Fischer
Abstract: The surface molecular orientation of a liquid crystalline (LC) layer made up a semi-fluorinated (SF) single side-groups [-CO-(CH^d2^)^dx-1^-(CF^d2^)^dy^F] (single SF groups) attached to polyisoprene homopolymer or the isoprene block of a styrene-isop ...

974. The Role of Feedstock Particle Size on the Microstructural Behavior of Plasma-Sprayed YSZ Deposits During Annealing
Topic: Ceramics
Published: 3/1/1999
Authors: H Boukari, Andrew John Allen, Gabrielle Gibbs Long, J Ilavsky, Jay S Wallace, C C Berndt, H Herman
Abstract: We have studied the microstructure of thick plasma-sprayed yttrium-stabilized zirconia deposits fabricated from different initial feedstock particle size (32, 47, 56 and 88) m in a series of mulitiple and Porod small-angle neutron scattering experim ...

975. The Role of Ge In Cluster Formation in B and BF2 Implanted Si Wafers After Ge Pre-Amorphization
Topic: Ceramics
Published: Date unknown
Authors: M A. Sahiner, C W Magee, D F Downey, Joseph C Woicik
Abstract: Cluster formation in high dose B, BF2 implanted Si wafers is an important problem in silicon doping, since it is one of the leading causes of the electrical deactivation of the dopant. In this study, we used Ge pre-amorphized, ultra low energy B an ...

976. The Segmented Cylinder Flexural Strength Test
Topic: Ceramics
Published: 9/1/2007
Author: George David Quinn

977. The Speed, Grain Boundary Morphology, and Composition Changes Resulting from DIGM
Topic: Ceramics
Published: Date unknown
Authors: John W. (John W.) Cahn, C M Elliott, P C Fife, O Penrose
Abstract: We use the equations for steady-state diffusion-induced grain boundary motion (DIGM), derived from our phase-field model, [17] to predict the grain boundary morphology and speed of DIGM, as well as the resulting compositions profiles, when the specim ...

978. The Surface Area of Cement Paste as Measured by Neutron Scattering -- Evidence for Two C-S-H Morphologies
Topic: Ceramics
Published: 10/1/1998
Authors: J Thomas, Hamlin M Jennings, Andrew John Allen
Abstract: Small-angle neutron scattering was used to measure the effect of water-to-cement ratio [w/c] and cement batch variation on the surface area of ordinary Portland cement [opc] paste after hydration for 28 days at room temperature, and to measure the de ...

979. The Ultra-Small-Angle X-Ray Scattering Instrument on UNICAT at the APS
Topic: Ceramics
Published: 10/1/2000
Authors: Gabrielle Gibbs Long, Andrew John Allen, J Ilavsky, P R Jemian, P Zchack
Abstract: A new ultra-small-angle X-ray scattering (USAXS) instrument has been commissioned as part of the UNICAT facility on the 33-ID line at the Advanced Photon Source. The instrument offers continuously-tunable optics for anomalous USAXS, 1000 times the t ...

980. The Use of Apertures to Create Discrete Combinatorial Libraries Using Pulsed Laser Deposition
Topic: Ceramics
Published: 5/18/2007
Authors: Nabil Bassim, Peter K. Schenck, Eugene Donev, Edwin J Heilweil, Eric J Cockayne, Martin L Green, Leonard Feldman
Abstract: In Pulsed-Laser Deposition (PLD), there are many processing parameters that influence film properties which may be studied such as substrate-target distance, background reactive gas pressure, laser energy, substrate temperature and composition in mul ...

Search NIST-wide:

(Search abstract and keywords)

Last Name:
First Name:

Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series