NIST logo

Publications Portal

You searched on:
Topic Area: Sustainable Manufacturing
Sorted by: title

Displaying records 51 to 60 of 63 records.
Resort by: Date / Title


51. Status and Opportunities to Support Product Category Rules in the U.S.
Series: Grant/Contract Reports (NISTGCR)
Topic: Sustainable Manufacturing
Published: 8/12/2013
Author: Rita Schenck
Abstract: Environmental Product Declarations (EPDs) are a kind of ecolabel that discloses the environmental impacts of a product over its life cycle, using the science of life cycle assessment. EPDs hold out the promise of supporting science based decisions in ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914298

52. Summary of the NIST Workshop on Sustainable Manufacturing: Metrics, Standards, and Infrastructure
Topic: Sustainable Manufacturing
Published: 8/31/2010
Authors: Rachuri Rachuri, Ram D Sriram, Anantha Narayanan Narayanan, Prabir Sarkar, Jae Hyun Lee, Kevin W Lyons, Vijay Srinivasan, Sharon J. Kemmerer
Abstract: This paper summarizes the presentations, discussions, and recommendations of the NIST Workshop Sustainable Manufacturing: Metrics, Standards, and Infrastructure held at NIST, Gaithersburg, Maryland, USA, October 13th through October 15th, 2009. The ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905901

53. Sustainable Manufacturing Program Workshop Report
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7975
Topic: Sustainable Manufacturing
Published: 7/9/2014
Authors: Rachuri Rachuri, Katherine C Morris, Utpal Roy, David Dornfeld, Soundar Kumara
Abstract: The National Institute of Standards and Technology (NIST)‰s Sustainable Manufacturing Program held a workshop on November 13-14, 2012, in Gaithersburg, MD. Dr. Shyam Sunder, Director of NIST‰s Engineering Laboratory, initiated the workshop proceeding ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913937

54. Sustainable Manufacturing: Metrics, Standards, and Infrastructure - NIST Workshop Report
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7683
Topic: Sustainable Manufacturing
Published: 4/21/2010
Authors: Rachuri Rachuri, Jae Hyun Lee, Anantha Narayanan Narayanan, Prabir Sarkar, Kevin W Lyons, Ram D Sriram, Sharon J. Kemmerer
Abstract: This report summarizes the presentations, discussions and recommendations of NIST Workshop on Sustainable Manufacturing: Metrics, Standards, and Infrastructure held at NIST, USA, on October 13th through October 15th, 2009. The primary objective of ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905065

55. Sustainable Manufacturing: Metrics, Standards, and Infrastructure - Workshop Summary
Topic: Sustainable Manufacturing
Published: 5/31/2010
Authors: Rachuri Rachuri, Ram D Sriram, Anantha Narayanan Narayanan, Prabir Sarkar, Jae Hyun Lee, Kevin W Lyons, Sharon J. Kemmerer
Abstract: This report summarizes the presentations, discussions, and recommendations of the NIST Workshop Sustainable Manufacturing: Metrics, Standards, and Infrastructure held at NIST, Gaithersburg, Maryland, USA, October 13th through October 15th, 2009. Th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905837

56. Sustainable Process Analytics Formalism: A Case Study of Book Binding System for Energy Optimization
Topic: Sustainable Manufacturing
Published: 8/7/2013
Authors: Duck Bong Kim, Guodong Shao, Alexander Brodsky, Ryan Consylman
Abstract: Energy is considered as one of important factors in sustainable manufacturing due to its relevance to depletion of material resources and generation of carbon oxide. To improve energy efficiency in manufacturing, optimization techniques are essential ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913129

57. Sustaining Engineering Informatics: Toward Methods and Metrics for Digital Curation
Topic: Sustainable Manufacturing
Published: 9/1/2007
Authors: Joshua Lubell, Eswaran Subrahmanian, Mahesh Mani, Rachuri Rachuri
Abstract: Ensuring the long-term usability of engineering informatics (EI) artifacts is a challenge, particularly for products with longer life cycles than the computing hardware and software used for their design and manufacture. Addressing this challenge req ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822746

58. TOWARDS THE SYNTHESIS OF PRODUCT KNOWLEDGE ACROSS THE LIFECYCLE
Topic: Sustainable Manufacturing
Published: 11/21/2013
Authors: Paul W Witherell, Boonserm Kulvatunyou, Rachuri Rachuri
Abstract: Product lifecycle management is an important aspect of today‰s industry, as it serves to facilitate information exchange and management between most, if not all, stages of a product‰s existence. As exchanged product information is inevitably subject ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913843

59. Toward Energy Efficient Manufacturing Enterprises
Topic: Sustainable Manufacturing
Published: 2/2/2011
Authors: Kevin W Lyons, Alexander Weissman, Ram D Sriram, Lalit Chordia
Abstract: Industrial enterprises have significant negative impacts on the global environment. Collectively, from energy consumption to greenhouse gases to solid waste, they are the single largest contributor to a growing number of planet-threatening environmen ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907627

60. Toward an Integrated Decision Support Framework for Sustainability CAE
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7909
Topic: Sustainable Manufacturing
Published: 4/22/2013
Authors: Lalit Patil, Lakshmi Srinivas, Krishna Murthy, Debasish Dutta, Rachuri Rachuri
Abstract: Sustainability evaluation is typically conducted after the product is completely designed. However, sustainability, like cost and weight, needs to be managed on a continuous basis, throughout the product development cycle. This requires a decisio ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911427



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series