NIST logo

Publications Portal

You searched on:
Topic Area: Building Materials
Sorted by: title

Displaying records 21 to 30 of 33 records.
Resort by: Date / Title


21. PERFORMANCE ASSESSMENTS INSIGHTS ON THE USE OF CEMENTS IN WASTE MANAGEMENT
Topic: Building Materials
Published: 11/7/2010
Authors: David W. Esh, Jacob Philip, Kenneth Alan Snyder
Abstract: The use of cementitious materials has been proposed in a variety of waste management systems because these materials can have a variety of desirable performance characteristics: hydraulic isolation, chemical isolation, structural stability. Cementit ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906913

22. Performance Criteria For an ASTM XRF Standard Test Method For Chemical Analysis of Hydraulic Cements: Inter-Laboratory Study Cements E and F
Series: Technical Note (NIST TN)
Report Number: 1815
Topic: Building Materials
Published: 12/6/2013
Author: Paul E Stutzman
Abstract: Bulk oxide determinations from a pair of portland cements provides the basis for calculation precision and accuracy values for X-ray fluorescence (XRF) analysis for both the fused glass bead and the pressed powder sample preparation. This report is ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914657

23. Reliability-Based Method for Service Life Prediction of Materials
Topic: Building Materials
Published: 9/17/2003
Authors: Christopher C White, Jonathan W. (Jonathan W.) Martin, S F Weber, L Shultz
Abstract: Standard test methods, such as ASTM C719, evaluate sealant performance though threshold test measurements. This method and its derivatives do not offer reliable predictions of in-service performance. This presentation will detail efforts to move aw ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860411

24. Rheological Characterization of Flow Table Reference Material
Topic: Building Materials
Published: 4/29/2011
Authors: Chiara F Ferraris, Haleh Azari
Abstract: The flow table is a standardized test that is widely used to qualify a mortar to be tested for compressive strength and air content. It is also the only standard test to quantify a mortar workability property. Therefore, the calibration of this dev ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906848

25. Roles of Adhesive and Interfacial Properties on Humidity-induced Failure
Topic: Building Materials
Published: 2/21/2010
Authors: Kar Tean Tan, Christopher C White, Donald Lee Hunston, Kristen L Steffens, Hatlee Timothy, Kristen Hamilton, Vogt D Bryan
Abstract: Adhesion loss due to moisture is a fundamental problem in a large diversity of industries ranging from microelectronics and automotive to aerospace. This study investigates the durability of model adhesive joints consisting of a homologous series of ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904700

26. SRM 2492 RHEOMETER USER GUIDE FOR GAP VERIFICATION AND TEST PROTOCOL
Topic: Building Materials
Published: 7/17/2013
Authors: Chiara F Ferraris, Jussara Tanesi
Abstract: N/A
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914092

27. Service Life Prediction for Sealants
Topic: Building Materials
Published: 9/29/2011
Authors: Christopher C White, Donald Lee Hunston, Kar Tean Tan, James J Filliben
Abstract: Previous industry consensus postulated that four elements of the weather: Temperature, Humidity, Ultraviolet Radiation, and Mechanical loading were responsible for the majority of the changes observed in sealants exposed to outdoor weathering. The N ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908778

28. Studies on the Effect of Movement During the Cure on the Mechanical Properties of Sealand
Topic: Building Materials
Published: 2/8/2004
Authors: Christopher C White, Donald Lee Hunston, R S Williams
Abstract: A novel sealant-testing device was used to con-tinuously monitor the mechanical properties of a one part silicone sealant for movement cycles initiated from 10 h to 168 h after sample creation. These cure times fall between the proposed RILEM TC-139 ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=860534

29. The Economics of New-Technology Materials: A Case Study of FRP Bridge Decking
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5864
Topic: Building Materials
Published: 7/1/1996
Authors: M A Ehlen, Harold E. Marshall
Abstract: Many new materials are bing developed from polymers, metals, and ceramics. Industry is beginning to introduce some of these high-performance or new-technology materials in construction and manufacturing applications because the materials have advant ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907922

30. The Role of Service Life Prediction In Sustainability Determinations
Topic: Building Materials
Published: 2/14/2011
Authors: Christopher C White, Kar Tean Tan, Donald Lee Hunston
Abstract: Sustainability calculations are based on assumptions about the energy required to produce, transport place in-service items. A critical component of these calculations is the expected service life of the material, component or system. Estimates of t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907521



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series