NIST logo

Publications Portal

You searched on:
Topic Area: Sustainable Manufacturing

Displaying records 1 to 10 of 55 records.
Resort by: Date / Title


1. REQUIREMENTS ANALYSES TO SUPPORT A MATERIAL INFORMATION MODEL FOR SUSTAINABILITY
Topic: Sustainable Manufacturing
Published: 11/21/2013
Authors: Paul W Witherell, Arvind Harinder, Katherine C Morris
Abstract: Materials, and therefore material selections, influence the sustainable impact of a product from beginning to end-of-life. With improved access to material information, product designers can attain newfound insight into the sustainability implication ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913844

2. TOWARDS THE SYNTHESIS OF PRODUCT KNOWLEDGE ACROSS THE LIFECYCLE
Topic: Sustainable Manufacturing
Published: 11/21/2013
Authors: Paul W Witherell, Boonserm Kulvatunyou, Rachuri Rachuri
Abstract: Product lifecycle management is an important aspect of today‰s industry, as it serves to facilitate information exchange and management between most, if not all, stages of a product‰s existence. As exchanged product information is inevitably subject ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913843

3. PROCESS DESCRIPTION AND ANALYTICS FORMALISM FOR DECISION GUIDANCE IN SUSTAINABLE MANUFACTURING
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7961
Topic: Sustainable Manufacturing
Published: 11/20/2013
Authors: Alexander Brodsky, Guodong Shao, Frank H Riddick
Abstract: This paper introduces NIST‰s Sustainable Process Analytics Formalism (SPAF) to facilitate the use of simulation and optimization technologies for decision support in sustainable manufacturing. SPAF allows formal modeling of modular, extensible, and r ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913035

4. A Methodology for Handling Standards Terminology for Sustainable Manufacturing
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7965
Topic: Sustainable Manufacturing
Published: 10/30/2013
Authors: Anantha Narayanan Narayanan, David Jacques Antoine Lechevalier, Katherine C Morris, Rachuri Rachuri
Abstract: In order to develop the discipline of sustainable manufacturing, the language of discourse needs to be properly and clearly communicated, for both manufacturers and consumers. As a result a range of information standards that define the needed te ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914343

5. Feature Information Model for Disassembly
Series: Technical Note (NIST TN)
Topic: Sustainable Manufacturing
Published: 8/20/2013
Author: Shaw C Feng
Abstract: As sustainability becomes an important issue nowadays, disassembly becomes one of the key processes to turn out-of-service products into new or rebuilt products to save energy and materials. A disassembly process includes many subprocesses, such as s ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911227

6. Energy Metrics for Product Assembly Equipment and Processes
Topic: Sustainable Manufacturing
Published: 8/13/2013
Authors: Shaw C Feng, FNU Kumaraguru, Christopher U Brown, Boonserm Kulvatunyou
Abstract: A key factor deciding the capacity to increase the sustainability of final products is the energy efficiency. The energy embodied in a product is an aggregation of all of the energy embodied in the products' components and subsystems, expended throug ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913306

7. Integration of Energy Information for Product Assembly and Logistics Processes
Topic: Sustainable Manufacturing
Published: 8/13/2013
Authors: Shaw C Feng, FNU Kumaraguru, Kincho H. Law, Kyeong Rim Ahn
Abstract: This paper presents an on-going effort at NIST to model the energy performance in assembly and supply chain processes as a part of a larger sus-tainability improvement goal. Energy performance modeling comprises two dis-tinct metrics like energy cons ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913682

8. Status and Opportunities to Support Product Category Rules in the U.S.
Series: Grant/Contract Reports (NISTGCR)
Topic: Sustainable Manufacturing
Published: 8/12/2013
Author: Rita Schenck
Abstract: Environmental Product Declarations (EPDs) are a kind of ecolabel that discloses the environmental impacts of a product over its life cycle, using the science of life cycle assessment. EPDs hold out the promise of supporting science based decisions in ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914298

9. A Model Based Continuous Improvement Methodology for Sustainable Manufacturing
Topic: Sustainable Manufacturing
Published: 8/7/2013
Authors: Sanjay Jain, Guodong Shao, Alexander Brodsky, Frank H Riddick
Abstract: This paper proposes a model based continuous improvement methodology to support efforts to achieve sustainable manufacturing, i.e., to increase efficiency and reduce environmental impact of manufacturing systems. Past efforts have provided guidance a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913697

10. An Integrated Approach to Information Modeling for the Sustainable Design of Products
Topic: Sustainable Manufacturing
Published: 8/7/2013
Authors: Paul W Witherell, Douglas Eddy, Ian Grosse, Sundar Krishnamurty
Abstract: The design process for more sustainable products can be best accomplished in a tradeoff-based design process that can methodically handle conflicting objectives, such as, environmental impact, cost, and product performance. Also, regulations, as repr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913248



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series