NIST logo

Publications Portal

You searched on:
Author: Iosif Shinder

Displaying records 1 to 10 of 13 records.
Resort by: Date / Title


1. IMPROVEMENTS TO NIST'S AIR SPEED CALIBRATION SERVICE
Published: 9/24/2013
Authors: Iosif I Shinder, Christopher J. Crowley, Bernard J Filla, Michael R Moldover
Abstract: We discuss five significant improvements to the Air Speed Calibration Service conducted by the National Institute of Standards and Technology (NIST): 1. Reduced-uncertainty calibrations of the secondary standard [Laser Doppler Anemometer, (LDA)] us ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914255

2. The Effect of Turbulence on a Multi-Hole Pitot Calibration
Published: 6/10/2013
Authors: Christopher J. Crowley, Iosif I Shinder, Michael R Moldover
Abstract: Abstract- Accurate calibrations of multi-hole Pitot tubes require thousands of measurements spanning ranges of the fluid‰s velocity, and the pitch and yaw angles. When calibrating a commercially-manufactured multi-hole Pitot tube in NIST‰s low-turbul ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912762

3. Airspeed Calibration Services: Laser Doppler Anemometer Calibration and Its Uncertainty
Published: 6/20/2012
Authors: Iosif I Shinder, Michael R Moldover, James M Hall, Mike Duncan, Joe Keck
Abstract: The National Institute of Standards and Technology (NIST) and the Oak Ridge National Laboratory (ORNL) are improving their airspeed calibration services. Both laboratories use spinning disks to generate linear velocities that are traceable to NIST‰s ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911456

4. Calibrations of Multi-Hole Pitot Tubes Depend on Tubulence
Published: 3/19/2012
Authors: Iosif I Shinder, Christopher J. Crowley, Michael R Moldover
Abstract: NIST is developing techniques to calibrate 2- and 3-dimensional anemometer systems (such as multi-hole pitot tubes) with a resolution of 0.3 %. The pitch and yaw response of multi-hole pitot tubes is complicated; therefore, calibrations require hund ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910815

5. Comparison of Gas Velocity Measurements and CFD Predictions in the Exhaust Duct of a Stationary Source
Published: 7/13/2011
Authors: Rodney A Bryant, Olatunde B. Sanni, Elizabeth F Moore, Robert P. Borthwick, Marco G Fernandez, Iosif I Shinder, Jiann C Yang, Aaron N Johnson
Abstract: Two series of independent flow measurements were conducted for cross validation of flow velocity in the exhaust duct of the NIST Large Fire Laboratory. In the first series, two pressure measurement probe types, an S probe and a 3-D probe, were used t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908658

6. Feasibility of an Accurate Dynamic Standard for Water Flow
Published: 6/1/2010
Authors: Iosif I Shinder, Michael R Moldover
Abstract: We used NIST's primary water flow standard to study the feasibility of accurately determining mass flow rates {I}m{/I}^ddot^ of water "dynamically," that is from the time derivative of the weight {I}W{/I} of the collection tank: {I}m{/I ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=832344

7. Improved NIST Airspeed Calibration Facility
Published: 3/23/2010
Authors: Iosif I Shinder, James M Hall, Michael R Moldover
Abstract: The National Institute of Standards and Technology (NIST) uses a laser Doppler anemometer (LDA) as a working standard for airspeed calibrations in the range 0.15 m/s to 75 m/s (0.34 to 168 miles/hour). We report improved procedures for calibrating th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904871

8. Dynamic Gravitational Standard for Liquid Flow: Model and Measurements
Published: 8/14/2009
Authors: Iosif I Shinder, Michael R Moldover
Abstract: We report progress in testing a dynamic gravimetric standard using both steady and unsteady water flows. For steady flows in the range 10 kg/s to 60 kg/s, the difference between the dynamic standard and NIST s static primary standard was 0.015 % wit ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903358

9. Accurately Measuring Unsteady Water Flows Using A Dynamic Standard
Published: 4/1/2009
Authors: Iosif I Shinder, Michael R Moldover
Abstract: We recently presented and tested a model for a dynamic gravimetric standard for steady water flows. In the range 10 kg/s to 60 kg/s, the difference between the dynamic standard and NIST's static primary standard was 0.015 % with a standard deviat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901476

10. Bulk Viscosity, Thermoacoustic Boundary Layers, and Adsorption Near the Critical Point
Published: 9/8/2006
Authors: Keith A Gillis, Iosif I Shinder, Michael R Moldover
Abstract: We measured the resonance spectrum of an acoustic resonator filled with xenon near its critical temperature Tc. We reduced the effect of gravity on the xenon by convective stirring to achieve a temperature resolution of (T-Tc)/Tc 7 10-6. The data y ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=830964



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series