NIST logo

Publications Portal

You searched on:
Author: Frederick Proctor

Displaying records 1 to 10 of 99 records.
Resort by: Date / Title


1. Toward the Ideal of Automating Production Optimization
Published: 11/15/2013
Authors: John L Michaloski, Frederick M Proctor, Jorge Arinez, Jonatan Berglund
Abstract: The advent of improved factory data collection offers a prime opportunity to continuously study and optimize factory operations. Although manufacturing optimization tools can be considered mainstream technology, most U.S. manufacturers do not take fu ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914707

2. Model Based Enterprise Summit Report
Series: Technical Note (NIST TN)
Report Number: 1820
Published: 11/4/2013
Authors: Joshua Lubell, Simon Paul Frechette, Robert R Lipman, Frederick M Proctor, John A Horst, Mark G Carlisle, Paul Jan-Lung Huang
Abstract: This report summarizes the presentations, discussions, and recommendations from the Model-Based Enterprise Summit held at the National Institute of Standards and Technology in December of 2012. The purpose of the Summit was to identify challenges, re ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914321

3. Assessment of Real-Time Factory Performance through the Application of Multi-Relationship Evaluation Design
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7911
Published: 4/17/2013
Authors: Brian A Weiss, John A Horst, Frederick M Proctor
Abstract: Successful operations within manufacturing environments require both accurate and precise information flow from one operation to the next. Incorrect, too little, or too much information can slow the manufacturing process and/or result in poor qua ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912784

4. Toward Better Integration of Vehicle Assembly Production Systems
Published: 11/15/2012
Authors: Jorge Arinez, John L Michaloski, Frederick M Proctor, William G Rippey, C Jerry Yen
Abstract: In today's manufacturing world, system integration often necessitates composing systems of technology that are not designed to interoperate with each other. This inherent incompatibility results in redundant, non-value added work that is required fo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911930

5. Factory Equipment Network Testing Framework: Concept, Requirements, and Architecture
Series: Technical Note (NIST TN)
Report Number: 1755
Published: 9/17/2012
Authors: James D Gilsinn, Kang B Lee, John L Michaloski, Frederick M Proctor, Yuyin Song
Abstract: This document describes the purpose, concept, requirements, and architecture for the Factory Equipment Network Testing (FENT) Framework and the software to test equipment on real-time factory networks. Other documents contain more detailed info ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911180

6. Factory Equipment Network Testing Framework: Universal Client Application, Application Programming Interface
Series: Technical Note (NIST TN)
Report Number: 1754
Published: 9/17/2012
Authors: James D Gilsinn, Kang B Lee, John L Michaloski, Frederick M Proctor, Yuyin Song
Abstract: This document describes the application programming interface (API) used by the Factory Equipment Network Testing (FENT) Framework to communicate between the main Universal Client Application (UCA) and the Personality Module (PM). This API abstra ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911181

7. Web-enabled Real-time Quality Feedback for Factory Systems using MTConnect
Published: 8/15/2012
Authors: John L Michaloski, Byeong Eon Lee, Frederick M Proctor, Sid Venkatesh
Abstract: Quality is a key element to success for any manufacturer, and the fundamental prerequisite for quality is measurement. In the discrete parts industry, quality is attained through inspection of parts but typically there is a long latency between ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911323

8. An Integrated Data Model for Quality Information Exchange in Manufacturing Systems
Published: 7/27/2012
Authors: William G Rippey, Yaoyao Fiona Zhao, Thomas Rollin Kramer, John A Horst, Frederick M Proctor
Abstract: Quality measurement is an integrated part of modern manufacturing systems. As the manufacturing industry has entered a digital and virtual era, information technology has become increasingly important for both machining and measurement systems. Effec ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910781

9. Enabling Machining Vision Using STEP-NC
Published: 6/8/2012
Authors: Martin Hardwick, Frederick M Proctor, David Loffredo, Sid Venkatesh
Abstract: STEP-NC is a new data format for manufacturing control. One of its applications is to enable integrated on machine measurement of machining processes using vision systems and other sensors. In this paper we describe the manufacturing process and manu ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910870

10. A Roadmap for STEP-NC Enabled Interoperable Manufacturing
Published: 6/17/2011
Authors: Fiona Zhao, Frederick M Proctor, Martin Hardwick, Sid Venkatesh, David Odendahl, Xun Xu
Abstract: STEP-NC is the result of a ten-year international effort to replace the RS274D (ISO 6983) G and M code standard with a modern associative language. The new standard connects CAD design data to CAM process data so that smart applications can understan ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908419



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series