NIST logo

Publications Portal

You searched on:
Author: Brian Scace

Displaying records 1 to 7.
Resort by: Date / Title

1. Safely mounting glass viewports to elastomer sealed vacuum flanges
Published: 6/17/2010
Authors: Patrick J Abbott, Brian R Scace
Abstract: Elastomer sealed vacuum flanges rely on specially sized elastomer O-rings and corresponding grooves to make an air-tight seal. Depending on the materials being sealed to one another, the O-ring/groove sealing mechanism may be designed for a specific ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903799

2. Analytical/Experimental Study of Vibration of a Room-Sized Airspring-Supported Slab
Published: 3/1/1998
Authors: H Amick, B Sennewald, E Clayton Teague, Brian R Scace
Abstract: This paper reports the results of the finite element analysis and in-situ testing of a large-scale (4 m x 10 m) pneumatically isolated concrete slab are reported. The slab was constructed as a design prototype for next generation metrology laboratori ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822527

3. Vibration of a Room-Sized Airspring-Supported Slab
Published: 1/1/1998
Authors: H Amick, B Sennewald, N C Pardue, E Clayton Teague, Brian R Scace
Abstract: This paper reports the results of the finite element analysis and in situ testing of a large-scale (4 m x 10 m) pneumatically isolated concrete slab. The slab was constructed as a design prototype for next-generation metrology laboratories at the Nat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820887

4. Microform Calibrations in Surface Metrology
Published: 2/1/1995
Authors: Jun-Feng Song, F Rudder, Theodore Vincent Vorburger, A Hartman, Brian R Scace, J Smith
Abstract: Microform calibrations include the measurement of complex profile forms and position errors of micrometer scale in combination with the measurement of deviations from a specified profile and surface texture of profile segments. Tolerances on the prof ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820769

5. Microform Calibrations in Surface Metrology
Published: 1/1/1994
Authors: Jun-Feng Song, F Rudder, Theodore Vincent Vorburger, A Hartman, Brian R Scace, J Smith
Abstract: Microform calibrations include the measurement of complex profile forms and position errors of micrometer scale in combination with the measurement of deviations from a specified profile and surface texture of profile segments. Tolerances on the prof ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902015

6. Strategy for Post-Process Control of a Machine Tool
Published: 1/1/1994
Authors: Theodore Vincent Vorburger, K Yee, Brian R Scace, F Rudder
Abstract: The automated control of machine-tool accuracy is discussed based on a quality architecture containing three control loops: real-time, process-intermittent, and post-process. This paper highlights the post-process loop. The architecture is being impl ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820726

7. The Geometric Characterization of Rockwell Diamond Indenters
Published: 1/1/1994
Authors: Jun-Feng Song, F Rudder, Theodore Vincent Vorburger, A Hartman, Brian R Scace, J Smith
Abstract: By using a stylus instrument, a series of calibration and check standards, and calibration and uncertainty calculation procedures, we have calibrated Rockwell diamond indenters with a traceability to fundamental measurements. The combined measurement ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820714



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series