NIST logo

Publications Portal

You searched on: Author: steven phillips Sorted by: date

Displaying records 51 to 60 of 65 records.
Resort by: Date / Title


51. Practical Aspects of Touch Trigger Probe Error Compensation
Published: 7/1/1997
Authors: William Tyler Estler, Steven David Phillips, Bruce R. Borchardt, Ted Hopp, M Levenson, K Eberhardt, Marjorie A McClain
Abstract: We present extensions of our prior work in modeling and correcting for pretravel variation errors in kinematic seat touch-trigger coordinate measuring machine (CMM) probes with straight styli. A simple correction term is shown to account for a range ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820843

52. Discussion of Statistical Issues in Geometric Feature Inspection Using Coordinate Measuring Machines
Published: 2/1/1997
Authors: Steven David Phillips, K Eberhardt
Abstract: A coordinate measuring machine (CMM) is a computer controlled device that uses a probe to obtain measurements on a manufactured part''s surface, usually one point at a time. Probe movements may be programmed or determined manually by operatio ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820802

53. Results of the NIST National Ball Plate Round Robin
Published: 1/1/1997
Authors: Gregory W Caskey, Steven David Phillips, Bruce R. Borchardt
Abstract: This report examines the results of the ball plate round robin administered by NIST. The round robin was part of an effort to assess the current state of industry practices for measurements made using coordinate measuring machines. Measurements of a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820994

54. The Calculation of CMM Measurement Uncertainty via The Method of Simulation by Constraints
Published: 1/1/1997
Authors: Steven David Phillips, Bruce R. Borchardt, Daniel S Sawyer, William Tyler Estler, David E Ward, K Eberhardt, M. Levenson, Marjorie A McClain, B Melvin, Ted Hopp, Y Shen
Abstract: The calculation of task specific measurement uncertainty when using coordinate measuring machines is an important and challenging task. Current methods to address this issue use simulation techniques (e.g., the virtual CMM) where the propagation of k ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820857

55. Error Compensation for CMM Touch Trigger Probes
Published: 10/1/1996
Authors: William Tyler Estler, Steven David Phillips, Bruce R. Borchardt, Ted Hopp, G Witzgall, M Levenson, K Eberhardt, Marjorie A McClain, Y Shen, X Zhang
Abstract: We present the analysis of a simple mechanical model of a common type of kinematic seat touch trigger probe widely used on modern coordinate measuring machines (CMMs). The model provides a quantitative description of the pretravel variation or probe- ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822130

56. Corrections for Wavelength Variations in Precision Interferometric Displacement Measurements
Published: 9/1/1996
Authors: Jack A Stone Jr., Steven David Phillips, G Mandolfo
Abstract: Precision interferometric displacement measurements require deadpath corrections to account for variations in wavelength during the course of the measurement. This paper discusses common errors in applying deadpath corrections and describes the corre ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820824

57. NIST SRM 9983 High Rigidity Ball-Bar Stand User Manual
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5659
Published: 6/1/1995
Authors: Daniel S Sawyer, Steven David Phillips, Gregory W Caskey, Bruce R. Borchardt, David E Ward, P Snoots
Abstract: This document is the user manual for the NIST SRM 9983 High Rigidity Ball Bar Stand. The manual contains a list of the components that are included as part of the unit. Complete instructions for setting up and assembling the stand to support a ball b ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820762

58. The Estimation of Measurement Uncertainty of Small Circular Features Measured by CMMs
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5698
Published: 2/1/1995
Authors: Steven David Phillips, Bruce R. Borchardt, William Tyler Estler
Abstract: This paper examines the measurement uncertainty of small circular features as a function of the sampling strategy, i.e., the number and distribution of measurement points. Specifically, we examine measuring a circular feature using a three-point samp ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820754

59. User Manual for the Interim Testing Artifact for CMMs
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5602
Published: 2/1/1995
Authors: Amy Singer, J Land, Steven David Phillips, Daniel S Sawyer, Bruce R. Borchardt, Gregory W Caskey, et al
Abstract: The Interim Testing Artifact (ITA) is designed to quickly test CMMs for performance problems so that they can be repaired before significant numbers of good parts are erroneously rejected (or bad parts accepted) by the CMM. Frequent testing using the ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820767

60. Error Compensation for CMM Touch Trigger Probes
Published: 1/1/1995
Authors: William Tyler Estler, Steven David Phillips, Bruce R. Borchardt, Ted Hopp, Christoph Johann Witzgall, M Levenson, et al
Abstract: We present the analysis of a simple mechanical model of a common type of kinematic seat touch trigger probe widely used on modem coordinate measuring machines (CMMs). The model provides a quantitative description of the pre-travel variation or probe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820736



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series