NIST logo

Publications Portal

You searched on:
Author: carl miller

Displaying records 31 to 40 of 56 records.
Resort by: Date / Title


31. Development of LED Photometric Standards at NIST
Published: 7/1/2003
Authors: Carl C Miller, T Heimer, Yuqin Zong, Yoshihiro Ohno, G Dezsi
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=104640

32. Improved Accuracy Photometric and Tristimulus-Color Scales Based On Spectral Irradiance Responsivity
Published: 7/1/2003
Authors: George P Eppeldauer, Steven W Brown, Carl C Miller, Keith R Lykke
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=104443

33. Absolute Alignment of the Reference Retroreflectometer at NIST
Published: 6/1/2003
Author: Carl C Miller
Abstract: The National Cooperative Highway Research Program (NCHRP Project 05-16) awarded The National Institute of Standards and Technology (NIST) a contract to develop a dedicated reference instrument for measuring retroreflective materials, and a calibratio ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841718

34. Improved Accuracy Photometric and Tristimulus-Color Scales Based On Spectral Irradiance Responsivity
Published: 1/1/2003
Authors: George P Eppeldauer, Steven W Brown, Carl C Miller, Keith R Lykke
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=104441

35. National Calibration Facility for Retroreflective Traffic Control Materials--Phase 1
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6940
Published: 9/1/2002
Authors: Carl C Miller, T Heimer, E A. Early
Abstract: Congress has directed the United States Department of Transportation to establish a standard for a minimum level of retroreflectivity that must be maintained for pavement markings and signs which apply to all roads open to public travel. Presented a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841684

36. National Calibration Facility for Retroreflective Traffic Control Materials - Phase I
Series: NIST Interagency/Internal Report (NISTIR)
Published: 1/1/2002
Authors: Carl C Miller, T Heimer, E A. Early
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=104642

37. Luminous Intensity of LEDs at NIST
Published: 10/1/2001
Authors: Carl C Miller, Yoshihiro Ohno
Abstract: Calibration facilities and procedures for measurement of Averaged LED intensity using the detector-based method have been developed at the National Institute of Standards and Technology (NIST). The scale has been established on two standard photomet ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841597

38. Total Luminous Flux Calibrations of LEDs at NIST
Published: 8/1/2001
Authors: Carl C Miller, Yoshihiro Ohno
Abstract: The total luminous flux (lumen) is one of the most important characteristics of Light Emitting Diodes (LEDs), and is commonly measured using integrating sphere photometers. Large variations of measurement results are reported among different manufac ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841591

39. Luminous Intensity Calibrations and Colorimetry of LEDs at NIST
Published: 7/1/2001
Authors: Carl C Miller, Yoshihiro Ohno
Abstract: Light Emitting Diodes (LEDs) are unique light sources differing greatly from traditional lamps in terms of physical size, flux level, spectrum and spatial distribution. The transfer of photometric scales from luminous intensity standard lamps to LED ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841590

40. Luminous Flux Calibrations of LEDs at NIST
Published: 5/1/2001
Authors: Carl C Miller, Yoshihiro Ohno
Abstract: The total luminous flux (lumen) is one of the most important characteristics of Light Emitting Diodes (LEDs), and is commonly measured using integrating sphere photometers. Large variations of measurement results are reported among different manufac ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841596



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series