NIST logo

Publications Portal

You searched on: Author: james filliben Sorted by: date

Displaying records 51 to 60 of 96 records.
Resort by: Date / Title


51. A Web-Based Data Analysis Methodology for Estimating Reliability of Weld Flaw Detection, Location, and Sizing
Published: 7/27/2008
Authors: Jeffrey T Fong, Owen F Hedden, James J Filliben, Nathanael A Heckert
Abstract: Recent advances in computer technology, intemet communication networks, and fmite element modeling and analysis capability have made it feasible for engineers to accelerate the feedback loop between the field inspectors of a structure or component fo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=152099

52. Robust Engineering Design for Failure Prevention
Published: 7/27/2008
Authors: Jeffrey T Fong, James J Filliben, Nathanael A Heckert, Roland deWit, Barry Bernstein
Abstract: To advance the state of the art of engineering design, we introduce a new concept on the "robustness" of a structure by measuring its ability to sustain a sudden loss of a part without causing an immediate collapse.  The concept is bas ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=152089

53. Uncertainty Estimate of Charpy Data Using a 5-factor 8-run Design of Experiments
Published: 7/27/2008
Authors: Charles G. Interrante, Jeffrey T Fong, James J Filliben, Nathanael A Heckert
Abstract: Scatter in laboratory data with duplicates on Charpy impact tests is analyzed by identifying several sources of variability such as temperature, manganese sulfide, initial strain, mis-orientation, and notch radius in order to estimate the predictive ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=152114

54. Methods for Quantifying and Characterizing Errors in Pixel-Based 3D Rendering
Series: Journal of Research (NIST JRES)
Published: 7/1/2008
Authors: John G Hagedorn, Judith Ellen Terrill, Adele P Peskin, James J Filliben
Abstract: We present methods for measuring errors in the rendering of three-dimensional points, line segments, and polygons in  pixel-based computer graphics systems.  We present error metrics for each of these three cases.  These methods are ap ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=152102

55. Design of Experiments Approach to Verification and Uncertainty Estimation of Simulations based on Finite Element Method
Published: 6/11/2008
Authors: Jeffrey T Fong, James J Filliben, Nathanael A Heckert, Roland deWit
Abstract: A fundamental mathematical modeling and computational tool in engineering and applied sciences is the finite element method (FEM).  The formulation of every such problem begins with the building of a mathematical model with carefully chosen simp ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=150675

56. On tuning the design of an evolutionary algorithm for machining optimization problem
Report Number: 823038
Published: 5/9/2007
Authors: Jean-Louis Vigouroux, Sebti Foufou, Laurent Deshayes, James J Filliben, Lawrence A Welsch, M Alkan Donmez
Abstract: In this paper, a methodology for tuning the design of an evolutionary algorithm (EA) is presented. An EA for solving machining optimization probfems having highly non-linear constraints and uncertainties is studied. A conventional turning optimizatio ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823038

57. Development of the NIST Rocky Flats Soil Standard
Published: 3/29/2007
Authors: Svetlana Nour, James J Filliben, Kenneth G. Inn
Abstract: The National Institute of Standards and Technology (NIST) Rocky Flats Soil-II Standard Reference Material (SRM) is being certified through a statistical analysis of results from an interlaboratory comparison of 14 laboratories from 4 countries. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=841180

58. Verification of a Gas Mask Calibrant
Series: NIST Interagency/Internal Report (NISTIR)
Published: 2/19/2007
Authors: Robert A Fletcher, Jiann C Yang, George William Mulholland, R Lance King, Michael R Winchester, D Klinedinst, Jennifer R Verkouteren, Thomas George Cleary, David Buckingham, James J Filliben
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901017

59. Stochastic Finite Element Method (FEM) Design of Experiments for Pressure Vessel and Piping (PVP) Decision Making.
Published: 7/3/2006
Authors: Jeffrey T Fong, James J Filliben, Roland deWit, Richard Joel Fields, Barry Bernstein
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901844

60. The Limits of Image-Based Optical Metrology
Published: 3/1/2006
Authors: Richard M Silver, Bryan M Barnes, Ravikiran Attota, Jay Shi Jun, James J Filliben, Juan Soto, Michael T. Stocker, P Lipscomb, Egon Marx, Heather J Patrick, Ronald G Dixson, Robert D. Larrabee
Abstract: An overview of the challenges encountered in imaging device-sized features using optical techniques recently developed in our laboratories is presented in this paper.  We have developed a set of techniques we refer to as scatterfield microscopy ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823206



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series