NIST logo

Publications Portal

You searched on: Author: geraldine cheok Sorted by: date

Displaying records 21 to 30 of 85 records.
Resort by: Date / Title


21. Assessing Technology Gaps for the Federal Highway Administration Digital Highway Measurement Program (NISTIR 7685)
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7685
Published: 4/1/2010
Authors: Geraldine S Cheok, Marek Franaszek, Itai Katz, Alan M. (Alan M.) Lytle, Kamel S Saidi, Nicholas A. Scott
Abstract: The ability to automatically collect more and better measurements of roadway assets (e.g., existence, condition, location, type) and to accurately map both geometry and elements of roadway assets is an important mitigating factor in roadway safety. T ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905154

22. Proceedings of the GSA 3D Imaging Workshop, February 28, 2011 (NIST TN 1699)
Series: Technical Note (NIST TN)
Report Number: 1699
Published: 12/9/2009
Authors: Geraldine S Cheok, Marek Franaszek, Kamel S Saidi
Abstract: The General Services Administration (GSA) has been involved in 3D imaging since the early 2000s. Since 3D imaging was a relatively new technology at that time, GSA needed to develop and provide initial guidance to their project managers (PMs) on 3D i ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908607

23. Evaluation of an Acceptance Sampling Method for 2D/3D Building Plans Derived from 3D Imaging Data
Published: 12/1/2009
Authors: Geraldine S Cheok, Marek Franaszek, James J Filliben
Abstract: An acceptance sampling method, based on obtaining physical measurements, for accepting 2D building plans generated from 3D imaging data is evaluated and demonstrated using an actual GSA (General Services Administration) facility. The objective of th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907878

24. Fitting Spheres to Range Data from 3D Imaging Systems
Published: 10/1/2009
Authors: Marek Franaszek, Geraldine S Cheok, Kamel S Saidi, Christoph Johann Witzgall
Abstract: Two error functions used for nonlinear Least Squares (LS) fitting of spheres to range data from 3D imaging systems are discussed: orthogonal error function and directional error function. Both of the functions allow unrestricted gradient-based minimi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=861541

25. Gauging the Repeatability of 3D Imaging Systems by Sphere Fitting
Published: 9/30/2009
Authors: Marek Franaszek, Geraldine S Cheok, Kamel S Saidi
Abstract: Multiple scans of the same object acquired with 3D imaging system (e.g., laser scanner) in the same experimental conditions could provide valuable information about the instrument s performance (e.g., stability, existence of bias, measurement error). ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903444

26. Guidelines for Accepting 2D Building Plans (NIST IR 7638)
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7638
Published: 9/30/2009
Authors: Geraldine S Cheok, James J Filliben, Alan M. (Alan M.) Lytle
Abstract: The General Services Administration's (GSA) Public Buildings Services manages 1600 buildings totaling 180, 000, 000 square feet. GSA‰s ability to capture, validate, and report the spatial information of its building assets (e.g., dimensions, areas, a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903918

27. Target Penetration of Laser-Based 3D Imaging Systems
Published: 1/19/2009
Authors: Geraldine S Cheok, Kamel S Saidi, Marek Franaszek
Abstract: The ASTM E57.02 Test Methods Subcommittee is developing a test method to evaluate the ranging performance of a 3D imaging system. The test method will involve either measuring the distance between two targets or between an instrument and a target. Th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909346

28. Guidelines for Accepting 2D Building Plans
Series: OTHER
Published: 12/10/2008
Author: Geraldine S Cheok
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901054

29. Proceedings of IS&T/SPIE 21st Annual Symposium on Electronic Imaging 2009 - 3D Imaging Metrology Conference
Published: 11/5/2008
Authors: Geraldine S Cheok, Kamel S Saidi, Marek Franaszek
Abstract: The ASTM E57.02 Test Methods Subcommittee is developing a test method to evaluate the ranging performance of a 3D imaging system. The test method will involve either measuring the distance between two targets or between an instrument and a target. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900883

30. ASTM E57 - 3D Imaging Systems
Published: 6/4/2008
Authors: Geraldine S Cheok, Alan M. (Alan M.) Lytle, Kamel S Saidi
Abstract: As the applications for 3D imaging systems continue to grow, the need for standards to evaluate these systems has become more critical. The ASTM E57 3D Imaging committee established in 2006 was formed specifically to develop standard terminology ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=861567



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series