NIST logo

Publications Portal

You searched on: Author: christopher mccowan

Displaying records 41 to 50 of 57 records.
Resort by: Date / Title


41. FORENSIC STUDY OF THE STEEL IN THE WORLD TRADE CENTER
Published: 12/30/2004
Authors: Thomas Allen Siewert, Joseph David McColskey, Christopher N McCowan, Frank W Gayle, William E Luecke, Stephen W Banovic, Timothy J Foecke, Richard Joel Fields
Abstract: In September of 2002, the National Institute of Standards and Technology began a two-year investigation into the World Trade Center (WTC) disaster of September 11, 2001. Now almost complete, the investigation addresses many aspects of the catastrophe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=30059

42. Size-Strain Line-Broadening Analysis of the Ceria Round-Robin Sample
Published: 12/1/2004
Authors: Davor Balzar, N Audebrand, M R Daymond, A Fitch, A Hewat, J I Langford, A Le Bail, D Louer, P Masson, Christopher N McCowan, N Popa, P W Stephens, B H. Toby
Abstract: We report the results of a line-broadening study on a ceria sample prepared for a size-strain round robin. The sample was prepared from a recursor hydrated ceria by heating in a silica crucible at 650 C for 45 hours. Another ceria sample wasprepar ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851306

43. Comparison of Strength Properties of Normotensive and Hypertensive Rat Pulmonary Arteries
Published: 10/1/2004
Authors: Elizabeth S Drexler, Christopher N McCowan, J Wright, Andrew J Slifka, Dunbar Ivy, Robin Shandas
Abstract: A series of tests were conducted to quantify the difference in the mechanical properties of normo-and hypertensive pulmonary arteries. A bubble-test design was emplpoyed to measure the biaxial properties of a segment of artery. The test results compa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851344

44. Constitutive Models for a Poly(e-caprolactone) Scaffold
Published: 10/1/2004
Authors: Timothy P Quinn, Tammy L. Oreskovic, Christopher N McCowan, N Washburn
Abstract: We investigate material models for a porous, polymeric scaffold used for bone. The material was made by co-extruding poly (e-caprolactone) (PCL), a biodegradable polyester, and poly(ethylene oxide)(PEO). The water soluble PEO was removed resulting in ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851345

45. The Structural Steel of the World Trade Center Towers
Published: 10/1/2004
Authors: Frank W Gayle, Stephen W Banovic, Timothy J Foecke, Richard Joel Fields, William E Luecke, Joseph David McColskey, Thomas Allen Siewert, Christopher N McCowan
Abstract: In September 2002, the National Institute of Standards and Technology became the lead agency in an investigation of the World Trade Center (WTC) disaster of September 11, 2001. The investigation addresses many aspects of the catastrophe, from occupa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853353

46. The NIST Charpy V-Notch Verification Program: Overview and Operating Procedures
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 1500-9
Published: 9/1/2003
Authors: Christopher N McCowan, Thomas Allen Siewert, D P Vigliotti
Abstract: Charpy impact testing is often specified as ,in acceptance test for structural materials, and companies performing acceptance tests are typically required to verify the performance of their impact machine periodically. The procedure for verifying th ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851238

47. An Experimental Method for Measuring Mechanical Properties of Rat Pulmonary Arteries Verified With Latex
Series: Journal of Research (NIST JRES)
Published: 6/1/2003
Authors: Elizabeth S Drexler, Andrew J Slifka, J Wright, Christopher N McCowan, Dudley Finch, Timothy P Quinn, J D McCloskey, Dunbar Ivy, Robin Shandas
Abstract: A study of the biomechanics and hemodynamics of pulmonary hypertension is incomplete without including mechanical properties data comparing healthy and diseased arterial tissue. In the initial stabe of this study, Sprague-Dawley rats will be induced ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851318

48. Failure Analysis of the WWVB Tower
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6619
Published: 8/1/2002
Authors: Joseph David McColskey, Christopher N McCowan, Raymond L Santoyo
Abstract: A failure analysis was conducted on the collapse of the NIST WWVB tower. The analysis included mechanical testing, chemical analysis, and metallographic examination of the failed part. We ascertained that the underlying reason for the collapse was ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851247

49. Observations on Differences Between the Energy Determined Using an Instrumented Striker and Dial/Encoder Energy
Published: 6/1/2002
Authors: M P Manahan, R B Stonesifer, Thomas Allen Siewert, Christopher N McCowan, D P Vigliotti
Abstract: Instrumented stricker systems and optical encoders are widely used for measurement of absorbed energy in both conventional and miniature Charpy tests. It has been observed that the total absorbed energy measured using these two technologies, while g ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851234

50. The History and Importance of Impact Testing
Published: 5/1/2002
Authors: Thomas Allen Siewert, M P Manahan, Christopher N McCowan, J M Holt, F J Marsh
Abstract: Charpy impact testing is a low-cost and reliable test method which is commonly required by the construction codes for fracture-critical structures such as bridges and pressure vessels. yet, it took from about 1900 to 1960 for impact-test technology ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851287



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series