NIST logo

Publications Portal

You searched on: Author: joseph mccolskey

Displaying records 41 to 50 of 56 records.
Resort by: Date / Title


41. Mechanical and Metallurgical Analysis of Structural Steel. Federal Building and Fire Safety Investigation of the World Trade Center Disaster (NIST NCSTAR 1-3)
Series: National Construction Safety Team Act Reports (NIST NCSTAR)
Report Number: 1-3
Published: 12/1/2005
Authors: Frank W Gayle, Richard Joel Fields, William E Luecke, Stephen W Banovic, Timothy J Foecke, Christopher N McCowan, Thomas A. (Thomas A.) Siewert, Joseph David McColskey
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=101016

42. Mechanical Properties of Structural Steels. Federal Building and Fire Safety Investigation of the World Trade Center Disaster (NIST NCSTAR 1-3D) ***DRAFT for Public Comments***
Series: National Construction Safety Team Act Reports (NIST NCSTAR)
Report Number: 1-3
Published: 9/1/2005
Authors: William E Luecke, Joseph David McColskey, Christopher N McCowan, Stephen W Banovic, Richard Joel Fields, Timothy J Foecke, Thomas A. (Thomas A.) Siewert, Frank W Gayle
Abstract: This report provides five types of mechanical properties for steels from the World Trade Center (WTC): elastic, room-temperature tensile, room-temperature high strain rate, impact, and elevated-temperature tensile. Specimens of 29 different steels re ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909059

43. Mechanical and Metallurgical Analysis of Structural Steel. Federal Building and Fire Safety Investigation of the World Trade Center Disaster (NIST NCSTAR 1-3) ***DRAFT for Public Comments***
Series: National Construction Safety Team Act Reports (NIST NCSTAR)
Report Number: 1-3
Published: 9/1/2005
Authors: Frank W Gayle, Richard Joel Fields, William E Luecke, Stephen W Banovic, Timothy J Foecke, Christopher N McCowan, Joseph David McColskey, Thomas A. (Thomas A.) Siewert
Abstract: This report is an overview of the results of the mechanical and metallurgical analysis of structural steel from the World Trade Center (WTC), part of the National institute of Standards and Technology Investigation of the WTC disaster of September 11 ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909061

44. A Tensile-Testing Technique for Micrometer-Sized Free-Standing Thin Films
Published: 7/1/2005
Authors: Yi-Wen Cheng, David Thomas Read, Joseph David McColskey, J Wright
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851350

45. FORENSIC STUDY OF THE STEEL IN THE WORLD TRADE CENTER
Published: 12/30/2004
Authors: Thomas A. (Thomas A.) Siewert, Joseph David McColskey, Christopher N McCowan, Frank W Gayle, William E Luecke, Stephen W Banovic, Timothy J Foecke, Richard Joel Fields
Abstract: In September of 2002, the National Institute of Standards and Technology began a two-year investigation into the World Trade Center (WTC) disaster of September 11, 2001. Now almost complete, the investigation addresses many aspects of the catastrophe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=30059

46. The Structural Steel of the World Trade Center Towers
Published: 10/1/2004
Authors: Frank W Gayle, Stephen W Banovic, Timothy J Foecke, Richard Joel Fields, William E Luecke, Joseph David McColskey, Thomas A. (Thomas A.) Siewert, Christopher N McCowan
Abstract: In September 2002, the National Institute of Standards and Technology became the lead agency in an investigation of the World Trade Center (WTC) disaster of September 11, 2001. The investigation addresses many aspects of the catastrophe, from occupa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853353

47. Mechanical Behavior of Contact Aluminum Alloy
Published: 1/1/2003
Authors: David Thomas Read, Yi-Wen Cheng, Joseph David McColskey, R R Keller
Abstract: Here we report the results of tensile tests of thin films of Al-0.5 % Cu deposited on bare silicon. This material was on a wafer that was subjected to the complete CMOS fabrication process, tensile strength, and elongation were all lower than the co ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851239

48. Failure Analysis of the WWVB Tower
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6619
Published: 8/1/2002
Authors: Joseph David McColskey, Christopher N McCowan, Raymond L Santoyo
Abstract: A failure analysis was conducted on the collapse of the NIST WWVB tower. The analysis included mechanical testing, chemical analysis, and metallographic examination of the failed part. We ascertained that the underlying reason for the collapse was ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851247

49. Measurement of Residual Stress in Bent Pipelines
Published: 6/1/2002
Authors: G A Alers, Joseph David McColskey
Abstract: Buried gas and oil pipelines can be subjected to unexpected bending loads causedby such earth movements as earthquakes, wash-outs, road building, mining subsidence, etc.as well as by denting from unintentional digging. In order to make a fitness-for ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851233

50. Tensile Properties of Free-Standing Aluminum Thin Films
Published: 9/1/2001
Authors: David Thomas Read, Yi-Wen Cheng, R R Keller, Joseph David McColskey
Abstract: Tensile properties of electron-beam-deposited free-standing aluminum thin films were measured. High {sigma}^dy^ and UTS were observed, mainly due to fine grain sizes, consistent with values reported in the literature. The observed Young's modulus, ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851168



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series