Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publications Portal

You searched on: Author: bruce borchardt

Displaying records 21 to 30 of 32 records.
Resort by: Date / Title


21. Results of the NIST National Ball Plate Round Robin
Published: 1/1/1997
Authors: Gregory W Caskey, Steven David Phillips, Bruce R. Borchardt
Abstract: This report examines the results of the ball plate round robin administered by NIST. The round robin was part of an effort to assess the current state of industry practices for measurements made using coordinate measuring machines. Measurements of a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820994

22. The Calculation of CMM Measurement Uncertainty via The Method of Simulation by Constraints
Published: 1/1/1997
Authors: Steven David Phillips, Bruce R. Borchardt, Daniel S Sawyer, William Tyler Estler, David E Ward, K Eberhardt, M. Levenson, Marjorie A McClain, B Melvin, Ted Hopp, Y Shen
Abstract: The calculation of task specific measurement uncertainty when using coordinate measuring machines is an important and challenging task. Current methods to address this issue use simulation techniques (e.g., the virtual CMM) where the propagation of k ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820857

23. Error Compensation for CMM Touch Trigger Probes
Published: 10/1/1996
Authors: William Tyler Estler, Steven David Phillips, Bruce R. Borchardt, Ted Hopp, G Witzgall, M Levenson, K Eberhardt, Marjorie A McClain, Y Shen, X Zhang
Abstract: We present the analysis of a simple mechanical model of a common type of kinematic seat touch trigger probe widely used on modern coordinate measuring machines (CMMs). The model provides a quantitative description of the pretravel variation or probe- ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822130

24. NIST SRM 9983 High Rigidity Ball-Bar Stand User Manual
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5659
Published: 6/1/1995
Authors: Daniel S Sawyer, Steven David Phillips, Gregory W Caskey, Bruce R. Borchardt, David E Ward, P Snoots
Abstract: This document is the user manual for the NIST SRM 9983 High Rigidity Ball Bar Stand. The manual contains a list of the components that are included as part of the unit. Complete instructions for setting up and assembling the stand to support a ball b ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820762

25. The Estimation of Measurement Uncertainty of Small Circular Features Measured by CMMs
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5698
Published: 2/1/1995
Authors: Steven David Phillips, Bruce R. Borchardt, William Tyler Estler
Abstract: This paper examines the measurement uncertainty of small circular features as a function of the sampling strategy, i.e., the number and distribution of measurement points. Specifically, we examine measuring a circular feature using a three-point samp ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820754

26. User Manual for the Interim Testing Artifact for CMMs
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5602
Published: 2/1/1995
Authors: Amy Singer, J Land, Steven David Phillips, Daniel S Sawyer, Bruce R. Borchardt, Gregory W Caskey, et al
Abstract: The Interim Testing Artifact (ITA) is designed to quickly test CMMs for performance problems so that they can be repaired before significant numbers of good parts are erroneously rejected (or bad parts accepted) by the CMM. Frequent testing using the ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820767

27. Error Compensation for CMM Touch Trigger Probes
Published: 1/1/1995
Authors: William Tyler Estler, Steven David Phillips, Bruce R. Borchardt, Ted Hopp, Christoph Johann Witzgall, M Levenson, et al
Abstract: We present the analysis of a simple mechanical model of a common type of kinematic seat touch trigger probe widely used on modem coordinate measuring machines (CMMs). The model provides a quantitative description of the pre-travel variation or probe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820736

28. Pitch Diameter Measurement of Threaded Gages Using a CMM
Published: 1/1/1995
Authors: Ralph C. Veale, Edgar G Erber, Bruce R. Borchardt
Abstract: The reference datum for a screw thread is the pitch diameter cylinder. Although a defined method within the United states for pitch diameter measurement exists, it does not follow worldwide procedures, and the complexity and uncertainties associated ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820782

29. A Users' Guide to NIST SRM 2084: CMM Probe Performance Standards
Published: 6/1/1994
Authors: Gregory W Caskey, Steven David Phillips, Bruce R. Borchardt, David E Ward, Daniel S Sawyer
Abstract: Standard Reference Materials (SRMs) as defined by the National Institute of Standards and Technology (NIST) are well-characterized materials, produced in quantity and certified for one or more physical or chemical properties. They are used to assure ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820674

30. Application of the ASME/ANSI B89.1.12M Standard to an Articulating Arm Coordinate Measuring Machine
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 5562(R)
Published: 4/1/1994
Authors: Gregory W Caskey, Steven David Phillips, Bruce R. Borchardt, H Eaton, J Smith
Abstract: Abstract not available.
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820673



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series