NIST logo

Publications Portal

You searched on:
Author: thomas bartel
Sorted by: title

Displaying records 1 to 8.
Resort by: Date / Title

1. Creep and Creep Recovery Response of Load Cells Tested According to U.S. and International Evaluation Procedures
Published: 5/1/1997
Authors: Simone L Yaniv, Thomas William Bartel
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821937

2. Force Measurement Services at NIST: Equipment, Procedures, and Uncertainty
Published: 7/17/1997
Authors: Thomas William Bartel, Ricky Lee Seifarth, Simone L Yaniv
Abstract: The facilities, instrumentation, and procedures currently used at the National Institute of Standards and Technology (NIST) for force measurement services are described. The uncertainty in the forces realized by the NIST primary force standard deadw ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820001

3. Force Metrology at NIST
Published: 1/1/2000
Authors: Simone L Yaniv, Thomas William Bartel
Abstract: This paper describes the measurements services, the instrumentation and procedures available for force metrology at the National Institute of Standards and Technology, USA. The uncertainty of the voltage ratio indicating system for strain gage load c ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820117

4. Intercomparisons of the Measurement of Force Among National Metrology Institutes
Published: 7/29/2001
Author: Thomas William Bartel
Abstract: A description will be given of the ongoing Comite International des Poids et Measures (CIPM) key comparison programs in force. The participation of the National Institute of Standards and Technology (NIST) in these programs to date will be discussed ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=821870

5. Ratio Calibration of a Digital Voltmeter for Force Measurement Using the Programmable Josephson Voltage Standard
Report Number: 32813
Published: 6/1/2008
Authors: Yi-hua Tang, Thomas William Bartel, June E. Sims
Abstract: Ratio calibration of a digital voltmeter (DVM) is critical for some applications such as load cell response for force measurement. The NIST DVM ratio service has provided ratio voltage measurements that are traceable to the Josephson Voltage Standard ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=32813

6. Ratio Calibration of a Digital Voltmeter for Force Measurement Using the Programmable Josephson Voltage Standard
Published: 6/2/2008
Authors: Yi-hua Tang, Thomas William Bartel, June E. Sims
Abstract: Ratio calibration of a digital voltmeter (DVM) is critical for some applications such as load cell response for force measurement. The NIST DVM ratio service has provided ratio voltage measurements that are traceable to the Josephson Voltage Standard ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=824618

7. Statistical Analysis of 4 MN Force Range Key Comparison
Report Number: 823017
Published: 11/27/2007
Author: Thomas William Bartel
Abstract: The factors contributing to the uncertainty are discussed for the measurements that were conducted for the 2 MN and 4MN force values of the very high force CIPM key comparison. Details of the statistical analysis by the pilot institute, NIST, are pro ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823017

8. Uncertainty in NIST Force Measurements
Published: 12/1/2005
Author: Thomas William Bartel
Abstract: This paper focuses upon the uncertainty of force calibration measurements at the National Institute of Standards and Technology (NIST). The uncertainty of the realization of force for the national deadweight force standards at NIST is discussed, as ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822217



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series