Data from a number of NIST collaborations focused on other applications have produced measurements useful for the standards program. This includes measurements made at NG6 of the spin-dependent portion of the coherent neutron scattering length for 3He that were recently completed. These data can be used in R-matrix analyses to improve the 3He(n,p) standard cross section. Also measurements are underway now of the 6Li(n,t) cross sections at sub-thermal energy. Following the completion of that work, measurements will be made of the 10B(n,α) cross sections at that energy. These will be the first absolute measurements of these cross sections in this energy region. These two cross sections are very important standards in the low energy region.
Comparison of new measurements of the hydrogen scattering cross section
A major effort was the recently completed international evaluation of the neutron cross section standards. This evaluation was supported in part by an International Atomic Energy Agency (IAEA) Coordinated Research Project, a Nuclear Energy Agency Nuclear Science Committee Subgroup and a U.S. Cross Section Evaluation Working Group Task Force. NIST played a major leadership role in each of these activities. A more than 100 page detailed journal paper on this work was published in Nuclear Data Sheets 110 3215 (2009). Contributors to the evaluation were from Austria, Belgium, China, Germany, Japan, Russia, South Korea, and the U.S.A. The cross sections for the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α1γ), Au(n,γ), 235U(n,f), and 238U(n,f) standards were obtained from this evaluation. These standards were accepted for use in the ENDF/B-VII.0 evaluation. In an effort to continually update the standards so they will be current for use by data libraries, NIST worked with the IAEA to form a nuclear data development project, "maintenance of the neutron cross section standards". This development project provides some resources for continually improving and updating the standards. Also codes used for the evaluation process will be maintained. The second Consultants' Meeting of this project, chaired by the NIST representative, was held in Vienna in October 2010. At the meeting the cross section database was discussed and updated; further work was done to help decide what inelastic scattering cross section should be used as a reference cross section; an investigation was continued on an additional energy region where gold capture could be a reference cross section; and database improvements for updates to evaluations of the 252Cf spontaneous fission neutron spectrum and the 235U thermal neutron-induced fission neutron spectrum were investigated with the objective of reducing uncertainties at the highest and lowest energies.
Many of the standards are used directly in neutron dosimetry for fluence determination. Also, almost all measurements of other dosimetry cross sections have been made relative to neutron cross section standards. The dosimetry community requires covariances for the full energy range from 10-5 eV to 20 MeV for their evaluations. Since the standards evaluation does not cover that entire region, it at first appeared that our evaluation would not be used by them. This led to additional work which provided covariances in the regions not included in our evaluation, so now the very well defined covariances obtained from the standards evaluation process are included in the new ENDF/B-VII mod, ENDF/B-VII.1.
Impact: Improved values for the standard neutron cross sections lead to similar improvements both in fundamental measurements such as absolute determination of neutron fluence and in applications using neutrons including neutron shielding for personnel protection, design of new detectors for nuclear monitoring and homeland security, and design of next-generation nuclear reactors and isotope production facilities.