Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).
Our objective is to ensure that the NIST beamlines U7A, X23A2, and X24A, located at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory, operate efficiently, effectively, and safely to enable customers to conduct their experiments. The Department of Energy (DOE) is our partner in this endeavor. One of our main goals is to meet DOE’s requirement that 25% of the beam time for each beamline is reserved for general users.
Synchrotron beamlines are widely used to determine structure of materials and devices that cannot be measured by more common, conventional methods. Such measurements enable the development of new materials and devices in a broad spectrum of industries. The NIST NSLS beamlines are fully operational and in use about eleven months of the year. There are 108 fully trained beamline users who conduct over 84 experiments each year. Examples of technology advancements in multimillion dollar industries that have been enabled by synchrotron measurements include: development of next-generation catalysts for chemical production; optimization of semiconductor and organic materials for microelectronics; and development of lubricants for magnetic hard drives.
Impact and Customers:
Over the past 15 years, we have established the following measurement capabilities at three beamlines at the NSLS: (1) near-edge X-ray absorption fine structure spectroscopy (NEXAFS) at beamline U7A; (2) extended X-ray absorption fine structure spectroscopy (EXAFS) at beamline X23A2; and, more recently, X-ray photoelectron spectroscopy (XPS) at beamline X24A. Although these beamlines operate 24 hours per day, seven days per week, the demand for beamtime far exceeds the time available. We continuously strive to maximize beamline accessibility and ease of operation for beamline users by developing new and improved operating practices. Further, we provide service to the synchrotron community by working with NSLS and DOE to optimize beamline operations and transfer our best practices to other beamlines at the NSLS. Members of our team have chaired the NSLS Users’ Executive Committee and have served on its Science Advisory Committee. Our team has served on DOE synchrotron proposal review panels at the NSLS, at the Advanced Photon Source, and at the Canadian Light Source.
EXAFS hutch before modifications
Reconfigured EXAFS hutch and components
Full-field imaging NEXAFS endstation
The imaging NEXAFS endstation includes a sample load lock and computerized sample manipulator for a bar holding up to 10 samples. The same sample bar and handling hardware is also used at our other NEXAFS and XPS endstations, thus enabling rapid sample exchange between endstations.
Start Date:October 24, 2008
Lead Organizational Unit:mml
Project Summary (PDF)