Topic/Subject Areas in MEL

MEL
AIAG award
AIAG Honors NIST/MEL with Chairman's Award
Calibrations
Conferences and Workshops
Economic Impact Studies
Eswaran Subrahmanian AAAS Fellow
Fabrication Technology
Force Programs/Projects in MEL
Green Manufacturing Programs/Projects in MEL
Intelligent Systems
Length Programs/Projects in MEL
Manufacturing Metrology
Manufacturing Systems Integration
Mass Programs/Projects in MEL
MEL
MEL Divisions and Groups
MEL Highlights April 2009
MEL Highlights January 2009
MEL Highlights June 2009
MEL Highlights March 2009
MEL Highlights May 2009
MEL Highlights Sept. 2009
MEL Mission and Vision
MEL Monthly Highlights
MEL Multimedia
MEL News
MEL Organization
MEL Programs and Projects
MEL Programs/Projects
MEL Staff
Metrology Programs/Projects in MEL
Nanomanufacturing Programs/Projects in MEL
National Workshop On Challenges To Innovation In Advanced Manufacturing: Agenda
National Workshop On Challenges To Innovation In Advanced Manufacturing: Industry Drivers And R&D Needs
NIST Announces Three-Phase Plan for Smart Grid Standards, Paving Way for More Efficient, Reliable Electricity
Ontologies Programs/Projects in MEL
Postdoc Opportunities in MMD
Postdoc Opportunities in MSID
Postdoc Opportunities in PED
Postdoc Opportunities ISD
Postdoctoral Opportunities in MEL
Precision Engineering
Robotics Programs/Projects in MEL
SME Fellow
Software and Tools
Software Disclaimer
Standard Reference Material (SRMs) supported by MEL
Supply Chain Programs/Projects in MEL
SURF in MEL
Sustainable Manufacturing Programs/Projects in MEL
Systems Integration Programs/Projects in MEL
What We Do
Work with MEL
Intelligent Systems
  Performance Evaluation and Benchmarking of Intelligent Systems
Autonomous Navigation Programs/Projects in Intelligent Systems Division
Control Systems
Homeland Security Programs/Projects in Intelligent Systems Division
Intelligent Systems Division
Is Your Microrobot Up for the (NIST) Challenge?
ISD Staff Directory
Knowledge Systems
Machine Systems
Metrology and Standards for Manufacturing Equipment Programs/Projects in Intelligent Systems Division
Metrology Programs/Projects in Intelligent Systems Division
Nanomanufacturing Programs/Projects in Intelligent Systems Division
NIST RoboCrane® Cuts Aircraft Maintenance Costs
Perception Programs/Projects in Intelligent Systems Division
Perception Systems
Performance Evaluation and Benchmarking of Intelligent Systems
Performance Metrics for Intelligent Systems Workshop
Rescue Robot Exercise Brings Together Robots, Developers, First Responders
Response Robot Evaluation Exercise (#6)
Robotics Programs/Projects in Intelligent Systems Division
September PerMIS Workshop Takes Measure of Intelligent System Performance
Simulation Programs/Projects in Intelligent Systems Division
Special Projects
Systems Integration
Translation Memory Workshop - Engage, Educate, and Understand
Welcome to Intelligent Systems
Control Systems
Control Systems
DML (Dimensional Markup Language)
Enterprise Integration
eQuipp (Exchange of Quality Measurement Process Plans)
Federal Industrial Control System Security
I++ DME (Dimensional Measurement Equipment)
Industrial Ethernet Network Performance (IENetP)
Industrial Network Security Testbeds and Performance Test Methods
Intelligent Industrial Control System Security and Industrial Network Standards
Intelligent Manufacturing
Intelligent Manufacturing Robotics and Automation Interoperability Standards
Private Sector Industrial Control System Security
QMD (Quality Measurement Data)
QMD Graphic
Specific Technical Security Requirements for Industrial Control Systems
Knowledge Systems
Figure 1. SCORE (System, Component and Operationally Relevant Evaluations)
Figure 2. SCORE (System, Component and Operationally Relevant Evaluations)
Figure 3. SCORE (System, Component and Operationally Relevant Evaluations)
Knowledge Systems
Metrology and Standard for Advanced Perception Systems for Intelligent Manufacturing
Performance Evaluation and Benchmarking of Robotic and Automation Systems
Performance Simulation Project
PRIDE (Prediction In Dynamic Environments)
PRIDE figure 4
PRIDE figure 6
PRIDE? figure 1
SCORE (System, Component and Operationally Relevant Evaluations)
Machine Systems
Army Research Laboratory Perception/ Performance Evaluation
DARPA Learning Applied to Ground Robots (LAGR)
Development of Standard Test Methods for Emergency Response Robots for Department of Homeland Security, Science and Technology Directorate (DHS S&T) and National Institute of Justice
Dynamic Tracking or Ground Truth Referencing of Robotic Perception Systems for Army Research Laboratory and Department of Homeland Security Science and Technology Directorate (DHS S&T)
Federal Highway Administration Exploratory Advanced Research Program
Machine Systems
Mobility and Manipulation Project
RoboCrane
Perception Systems
Perception Systems
Systems Integration
Control Systems and Positioning for Nanoscale Measurements and Standards
Measurement Science for Intelligent Manufacturing Robotics and Automation
Nanorobotics and NEMS Measurement Science
Overhead schematic view of the collaborative robot test bed
Safety for Next Generation Manufacturing
Systems Integration
Manufacturing Metrology
Acceleration Programs/Projects in Manufacturing Metrology Division
Acoustical Pressure Measurement Programs/Projects in Manufacturing Metrology Division
Calibrations (Mechanical) Programs/Projects in Manufacturing Metrology Division
Force Programs/Projects in Manufacturing Metrology Division
Lithography Metrology Programs/Projects in MEL
Machine Tool Metrology
Manufacturing Metrology
Manufacturing Process Metrology
Mass and Force
Mass Programs/Projects in Manufacturing Metrology Division
Measurement Services Programs/Projects in Manufacturing Metrology Division
Measurement Standards Programs/Projects in Manufacturing Metrology Division
Mechanical Metrology Programs/Projects in Manufacturing Metrology Division
MEL Helps Preserve the 500-year-old Waldseemüller Map
Metrology and Standards for Manufacturing Equipment Programs/Projects in Manufacturing Metrology Division
Metrology and Standards for Manufacturing Process Programs/Projects in Manufacturing Metrology Division
MMD Staff
Optical Metrology Programs/Projects in Manufacturing Metrology Division
Sensor Development and Application
Sensors Programs/Projects in Manufacturing Metrology Division
IEEE
1451 Group 1
1451 Group 4
Definitions
Meta TEDS
Mass and Force
Automation Update of Force Laboratory Deadweight Machines
Calibration of the Proving Ring
How did the Proving Ring Come About
Implement Robotic Mass Measurements in SP250 Services
Mass 1 kg CCM Key Comparison
Mass and Force Group
Mechanical Metrology
Proving Ring Patent
Proving Ring Patent 2
Redefinition of the kilogram
Small Force Metrology
The Proving Ring
The Proving Ring Design
Uniform Realization of the Unit of Torque in the US
What is Force
Why measure force?
Manufacturing Process Metrology
Comparison and Uncertainty Evaluation of Methods for Asphere Metrology
Fundamental Metrology for Material Processing
Investigation of Measurements and Standards Needs for Metal-based Additive Processes
Manufacturing Process Metrology Group
Measurement Methods and Services for Optical Reference Surfaces
Measuring Aspheric Optics using Binary Holograms
Measuring the Height Transfer Function of Phase-Shifting Interferometers
Metrology for Advanced Optics
Nano-Structured Optics for Measuring Spherical Surfaces with Large Radii
Wafer Flatness and Wafer Thickness Variation
Machine Tool Metrology
In-Situ 3D Optical and Mechanical Metrology of Fabricated Parts
Low Frequency Vibration Metrology
Low Frequency Vibration SIM Comparison
Machine Tool Metrology Group
Measurements and Standards for Science-Based Manufacturing
Metrology and Standards for Coordinated 5-Axis Motion
Next-Generation Rectilinear Wide-Bandwidth Accelerometer Measurements 
Performance Metrics for Manufacturing Equipment Used as Measuring Tools
Sensor Development and Application
Infrasound Metrology
Manufacturing Process Monitoring and Control Using Wireless Sensor Networks
Next Generation Acoustic Measurements of Microphones
Sensor Development and Application Group
Sensor Standard Harmonization
Manufacturing Systems Integration
Agenda: NIST Workshop on Sustainable Manufacturing
AIAG Outstanding Achievement Award
Design & Process
Don Libes - Publications List
Enterprise Systems
Green Manufacturing Programs/Projects in MSID
Lean Manufacturing Programs/Projects in Manufacturing Systems Integration Division
Manufacturing Simulation & Modeling
Manufacturing Standards Metrology
Manufacturing Systems Integration Division
Metrology Programs/Projects in Manufacturing Systems Integration Division
MSID Associates
MSID Highlights
MSID Highlights 1_01_09
MSID Highlights 1_02_09
MSID Highlights 10_01_07
MSID Highlights 10_02_07
MSID Highlights 11_01_07
MSID Highlights 12_01_07
MSID Highlights 2_01_08
MSID Highlights 2_02_08
MSID Highlights 5_01_09
MSID Highlights 6_01_08
MSID Highlights 6_01_09
MSID Highlights 7_01_08
MSID Highlights 7_02_08
MSID Highlights 7_03_08
MSID Highlights 8_01_09
MSID Highlights 8_02_09
MSID Highlights 8_03_09
MSID Highlights 9_01_08
MSID Highlights 9_01_09
MSID Highlights FY08
MSID in the News
MSID Introduction
MSID Overview & Vision
MSID Partnerships - Consortia
MSID Partnerships - Government Agencies
MSID Software Releases
MSID Staff Directory
MSID Staff Recognition
MSID Standards Activities
NIST Workshop on Sustainable Manufacturing: Metrics, Standards, and Infrastructure
Ontologies Programs/Projects in Manufacturing Systems Integration Division
Product Data Programs/Projects in Manufacturing Systems Integration Division
QOD Standalone Tool Release
Simulation Programs/Projects in Manufacturing Systems Integration Division
Supplier Development Programs/Projects in MEL
Supply Chain Programs/Projects in Manufacturing Systems Integration Division
Sustainable Manufacturing Programs/Projects in MSID
Systems Integration for Manufacturing Applications Office
Systems Integration Programs/Projects in Manufacturing Systems Integration Division
Vijay Srinivasan Elected as ASME Fellow
Design & Process
Design and Process Group
Information Models for Sustainable Manufacturing
LifeCycle Graphic
Long Term Knowledge Retention for Digital Technical Product Documentation
Model-based Engineering for Sustainable Manufacturing
Scheme for computing Carbon Weight (footprint) for Manufactured Products
Standards and Testbeds for Sustainable Manufacturing
STEP Evolution and Extensions for Sustainable Manufacturing
Survey and Analysis of Relevant Standards for Sustainable Manufacturing
Sustainable and Lifecycle Information-based Manufacturing
Enterprise Systems
Architecture for MOSS Conformance Demonstration
Enterprise Systems Group
Improve Content Testing for Manufacturing Integration Solutions
Reduce Shipping Delays and Costs in Long-distance Supply Chains
Supply Chain Integration
Manufacturing Simulation & Modeling
Manufacturing Simulation & Modeling Group
Model-based Engineering of Supply Networks
Simulation of Manufacturing Enterprises for Sustainability
Manufacturing Standards Metrology
Manufacturing Standards Metrology Group
Systems Integration for Manufacturing Applications Office
Adaptable & Automated Testing Tools
ASTM/IUPAC Standards for Exchange and Archiving of Instrument Data and NIST Chemical Reference Data – AnIML
Cross-industry eBusiness Standards Convergence – Federated Registry Prototype
Data Standards for Structural Bioinformatics
Developing, Searching and Exploiting Semantic Mathematical Content
Infrastructure for Integrated Electronics Design and Manufacturing (IIEDM)
Interoperability of Databases for Development and Manufacturing
Interoperability Standards for Capital Facilities Equipment and Construction Supply Chains
Numerical Data Markup Language (UnitsML)
Program Background
Publications
SIMA
SIMA Technical Projects
Standards for Physical and Chemical Property Data Interchange
Tools & Software
Virtual Project Data Integration Testbed
Precision Engineering
Atomic Force Microscopy (AFM) Programs/Projects in Precision Engineering Division
Calibrations Programs/Projects in Precision Engineering Division
Characterization, Nanometrology, and Nanoscale Measurements Programs/Projects in Precision Engineering Division
Dimensional Metrology Programs/Projects in Precision Engineering Division
Documentary Standards Programs/Projects in Precision Engineering Division
Electron Microscopy Programs/Projects in Precision Engineering Division
Engineering Metrology
Large-Scale Coordinate Metrology
Length Programs/Projects in Precision Engineering Division
Length—Evolution from Measurement Standard to a Fundamental Constant
Measurement Services Programs/Projects in Precision Engineering Division
Metrology and Standards for Manufacturing Equipment Programs/Projects in Precision Engineering Division
Metrology in Precision Engineering Division
Nanofabrication, Nanomanufacturing, and Nanoprocessing Programs/Projects in Precision Engineering Division
Nanomanufacturing Programs/Projects in Precision Engineering Division
Nanoscale Dimensioning Is Fast, Cheap with New NIST Optical Technique
Nanoscale Metrology
Nanostructured Materials Programs/Projects in Precision Engineering Division
Optical Metrology Programs/Projects in Precision Engineering Division
Optical Microscopy Programs/Projects in Precision Engineering Division
PED Mission and Vision
Precision Engineering Division
Precision Engineering Division Staff Directory
Standard Reference Materials Programs/Projects in MEL
Standards Programs/Projects in Precision Engineering Division
Surface and Microform Metrology
Time Line for the Definition of the Meter
Traceability Programs/Projects in Precision Engineering Division
Engineering Metrology
Engineering Metrology Group
Engineering Metrology Group Staff Directory
MicroFeature Calibration Development
Optical Comb and Refractometry
Selected Publications on Dimensional Metrology - 20-Degree Celsius Paper
Selected Publications on Dimensional Metrology - Gage Blocks
Selected Publications on Dimensional Metrology - Measurement Assurance
Selected Publications on Dimensional Metrology - Other Calibrations
Selected Publications on Dimensional Metrology - Uncertainty and Statistics
Large-Scale Coordinate Metrology
Algorithm Testing
Calibrations and Special Tests
Complex Geometry Instrumentation and Standards
Dimensional Metrology Program
Improvements in Calibrations and Uncertainty Evaluation
Large-Scale Coordinate Metrology Group
Large-Scale Coordinate Metrology Staff Directory
Metal Tapes
National and International Standards
Precision metal rulers
Ranging Tests for Laser Scanners
Ranging Tests for Laser Trackers
Research Activities
Research Activities - Papers
Special Tests of Long Length Standards
Standards for Coordinate Metrology Instruments
Standards for Measurement Uncertainty
Standards for Metrology Artifacts
Volumetric Tests for Coordinate Metrology Instruments
Nanoscale Metrology
Atom-Based Standards and Fabrication
Atomic Force Microscope (AFM) Nanoparticle Metrology
High-Throughput Nanometrology with Scatterfield Microscopy
Nanomanufacturing Metrology Program
Nanoparticle Manipulation Metrology
Nanoscale Metrology Group
Nanoscale Metrology Group Staff Directory
Next-Generation Nanometrology Program
Optical Linescale Metrology
Overlay Instrument and Wafer Target Designs
Photomask Dimensional Metrology
Scanning Particle-Beam Microscope Innovations
Wafer Level SEM Metrology for Critical Dimension Measurements
Surface and Microform Metrology
Calibrated Atomic Force Microscopy
Electromagnetic Scattering
Metrology Electron Microscopy
Microform Metrology
Micrometer Level Surface Finish Metrology
Nanometer Scale Dimensional Metrology
Standard Bullets and Casings
Surface and Microform Metrology Group
Surface and Microform Metrology Group Staff Directory
Surface Finish Metrology
Wafer Level AFM Metrology for Critical Dimension Measurements
Contact

General Information:
301 975 3400 Telephone
301 948 5668 Facsimile

100 Bureau Drive, M/S 8200
Gaithersburg, MD 20899-8200