On-Chip Integrated Silicon Photonic Thermometers

Published

September 1, 2015

Author(s)

Nikolai N. Klimov, Thomas P. Purdy, Zeeshan Ahmed

Abstract

The fundamental limitations of resistance-based thermometry and the desire to reduce sensor ownership have produced considerable interest in the development of photonics-based temperature sensors as an alternative to resistance thermometers. Photonic temperature sensors have the potential to leverage advances in frequency metrology to provide cost effective measurement solutions. We report on the fabrication and characterization of photonic-based nanoscale thermometers. Two types of temperature sensors, described in this work, a silicon photonic Bragg grating cavity and photonic crystal cavity devices, were fabricated using silicon-on-insulator CMOS-technology. The devices have built-in Fabry-Perot cavities, resonance’s wavelength of which shifts systematically with temperature. The sensitivity of photonic nanoscale thermometers can be tuned by a top-cladding material. When cladded with a poly(methyl methacrylate) thin layer, the sensitivity is  70 pm/degC, on the other hand, cladding with a silicon dioxide layer gives an improved sensitivity of  80 pm/degC. The described photonic thermometers have a temperature sensitivity that is at least seven to eight times better, compared to the sensitivity of conventional fiber Bragg grating sensors. We demonstrate that silicon photonic nanoscale thermometers are a viable temperature sensing solution.

Citation

Sensors & Transducers Journal

Volume

191

Issue

8

Pub Type

Journals

Download Paper

Local Download

Keywords

photonic thermometer, photonic crystal cavity, waveguide Bragg grating

Citation

Klimov, N. , Purdy, T. and Ahmed, Z. (2015), On-Chip Integrated Silicon Photonic Thermometers, Sensors & Transducers Journal, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=919132 (Accessed April 24, 2024)