Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Use of Half Metallic Heusler Alloys in CoFeB/MgO/Heusler Alloy Tunnel Junctions

Published

Author(s)

Andrew P. Chen, Gen G. Feng, Robert D. Shull

Abstract

Heusler Alloys Co(sub2)FeSi and Co(sub2)MnSi were deposited on both single crystal MgO (100) and polycrystalline SiO(Sub2) silicon thermal oxide substrates and characterized by x-ray diffraction before and after thermal annealing at various temperatures. Co(Sub2)FeSi and Co(Sub2)MnSi deposited on MgO (100) grow as L2(sub1) or B2 structures but grow as an A2 structure on the SiO(sub2) substrate, Co(Sub2)FeSi and Co(Sub2)MnSi were also deposited in a magnetic tunnel junction (MTJ) stack as the free and reference layers above and below the MgO barrier layer respectively, thereby replacing Co(Sub20)Fe(Sub60)B(Sub20) as those layers in the more common MTJ stack. The tunneling magnetoresistance (TMR) ratio is higher if Co(Sub2)FeSi is the free layer, but lower when Co(Sub2)FeSi is the reference layer.
Citation
IEEE Transactions on Magnetics

Keywords

Heusler Alloys, MgO MTJs

Citation

Chen, A. , Feng, G. and Shull, R. (2013), Use of Half Metallic Heusler Alloys in CoFeB/MgO/Heusler Alloy Tunnel Junctions, IEEE Transactions on Magnetics (Accessed March 28, 2024)
Created July 15, 2013, Updated February 19, 2017