Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Assessment of the glassy phase reactivity in fly ashes used for geopolymer cements

Published

Author(s)

Paul E. Stutzman, Katherine Aughenbaugh, Maria Juenger

Abstract

Geopolymer cements have not found widespread use as a portland cement replacement, in part due to the difficulty in proportioning mixtures in a reliable manner. Unlike portland cements, which are mixed with water, geopolymer cements contain caustic activating solutions, which must be selected carefully to optimize strength and durability. Geopolymer cement can be designed by tailoring caustic solution composition to the reactive phase composition of the solid component of the mixture; however, assessing which phases are reactive is challenging for complex and heterogeneous solids such as fly ash. The present work focuses on applying a scanning electron microscopy and multispectral image analysis (SEM-MSIA) method to identify and quantify the reactive glassy phases in fly ash and to determine how these phases dissolve over time in a caustic activating solution. The fly ash was selected based upon its oxide contents and was analyzed for phase content using x-ray diffraction and Rietveld analysis (RQXRD) and SEM-MSIA. The MSIA method identified multiple glassy phases in the fly ash. Next, the fly ash was suspended in 8 mol/L NaOH, and tested at various time intervals with SEM-MSIA to track changes in the amounts of each individual glassy phase initially identified in the fly ash. The results showed that an aluminosilicate glass (C-A-S) with a moderate amount of calcium appeared to be the most reactive between 0 and 28 days for a Class F fly ash. Other phases that were identified in the fly ash included a high-Ca C-A-S glass, two aluminosilicate glasses with different S/A ratios, two alkali-modified A-S phases, and an iron- containing glass.
Citation
Advances in Civil Engineering Materials

Citation

Stutzman, P. , Aughenbaugh, K. and Juenger, M. (2013), Assessment of the glassy phase reactivity in fly ashes used for geopolymer cements, Advances in Civil Engineering Materials, [online], https://doi.org/10.1520/STP156620120105 (Accessed April 25, 2024)
Created June 1, 2013, Updated November 10, 2018