Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Extinction of Cup-Burner Diffusion Flames by Catalytic and Inert Inhibitors

Published

Author(s)

Gregory T. Linteris

Abstract

The first tests of super-effective flame inhibitors blended with CO2 have been performed in methane-air co-flow diffusion flames. Although the organometallic agents used are typically one or two orders of magnitude more effective inhibitors than CF3Br when evaluated in premixed and counterflow diffusion flames, they have been found to be surprisingly ineffective compared to CF3Br in cup-burner flames. In order to understand the poor performance, the CO2 volume fraction required for extinction was also determined for a range of added catalytic inhibitor volume fraction. When added at low volume fraction, the agents TMT, Fe(CO)5, and MMT, were effective at reducing the volume of CO2 required for extinction, with a performance relative to CF3Br of 2, 4, and 8, respectively. However, as the volume fraction of each metallic catalytic inhibitor was increased, the effectiveness diminished rapidly. The greatly reduced marginal effectiveness is believed to be caused by loss of active gas-phase species to condensed-phase particles. Laser scattering measurements in flames with Fe(CO)5 / CO2 blends detected particles both inside and outside (but not coincident with) the visible flame location. The peak scattering cross section for vertically polarized light was 220 times the value for room temperature air. For the metallic inhibitors, their effectiveness is believed to be reduced because of particle formation, followed by thermophoresis, which prevents the inhibiting species from reaching the relevant zone of the flame. The results indicate that the appropriate flame configuration for evaluating the effectiveness fire suppression agents can depend strongly upon properties of the agent itself, in some cases switching the measure of performance by an order of magnitude.
Proceedings Title
Proceedings of SEcond NRIFD Symposium: Science, Technolgy and Standards for Fire Suppression Systems
Conference Dates
July 1-19, 2002
Conference Location
Tokyo, JA
Conference Title
NRIFD Symposium-Science, Technology and Standards for Fire Suppression Systems

Keywords

cup burner, fire suppression, flame inhibition, halon replacements, particles

Citation

Linteris, G. (2002), Extinction of Cup-Burner Diffusion Flames by Catalytic and Inert Inhibitors, Proceedings of SEcond NRIFD Symposium: Science, Technolgy and Standards for Fire Suppression Systems, Tokyo, JA, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=861145 (Accessed March 29, 2024)
Created December 1, 2002, Updated February 19, 2017