Slifka, A.
(2000),
Thermal-Conductivity Apparatus for Steady-State, Comparative Measurement of Ceramic Coatings, Journal of Research of the National Institute of Standards and Technology, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=851228
(Accessed April 24, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Thermal-Conductivity Apparatus for Steady-State, Comparative Measurement of Ceramic Coatings
Published
Author(s)
Abstract
An apparatus has been developed to measure the thermal conductivity of thermal barrier coatings. Since the method uses an infrared microscope for temperature measurement, coatings as thin as 20 υm can, in principle, be measured using this technique. The measurement method used is a steady-state, comparative method that uses the known thermal conductivity of the substrate material as the reference material for heat flow measurement. The experimental method is validated by measuring a plasma-sprayed coating that has been previously measured using an absolute, steady-state measurement method. The new measurement method has an experimental uncertainty of 20%. The measurement of the plasma sprayed coating gives 0.58 Wm-1×K-1 which compares well with the 0.62 Wm-1×K-1 measured using the absolute method.Citation
Journal of Research of the National Institute of Standards and Technology
Volume
105
Issue
4
Pub Type
Journals
Download Paper
Keywords
infrared microscope, thermal conductivity, thermal-barrier coating, zirconia
Citation
Created August 1, 2000, Updated February 19, 2017