Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).
NIST Authors in Bold
|Author(s):||Marc F. Desrosiers; M Peters; James M. Puhl;|
|Title:||A Study of the Alanine Dosimeter Irradiation Temperature Coefficient from 25°C to 80°C|
|Published:||September 01, 2009|
|Abstract:||The response of high-dose-range chemical dosimeters is dependent on the dosimeter temperature during irradiation. Typically, irradiation temperatures are estimated by measurements, calculations, or some combination of the two. Then using the temperature coefficient for the dosimetry system, the dosimeter response is adjusted or corrected to be consistent with the irradiation temperature for the calibration curve. Consequently, the estimation of irradiation temperature and the response correction via the temperature coefficient are sources of uncertainty in industrial dosimetry. To date, studies of dosimetry system performance at high temperatures have been limited. The maximum irradiation temperature for temperature coefficient studies of commercial alanine dosimeter formulations has not exceeded 50 °C. However, high-energy electron-beam processing can expose dosimeters to temperatures as high as 70 °C. This study aims to examine the temperature coefficient above 50 °C and assess the accuracy of the dosimeter response corrections. The findings reveal small but significant deviations from linearity above 70 °C. The magnitude of this deviation and its implications to dosimetry measurements will be discussed.|
|Citation:||Radiation Physics and Chemistry|
|Pages:||pp. 465 - 468|
|Keywords:||alanine, dosimeter, dosimetry, electron paramagnetic resonance, gamma ray, ionizing radiation, temperature coefficient|