Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publication Citation: Surface Characterization of Laser- Ablated Polymers Used for Microfluidics

NIST Authors in Bold

Author(s): D L. Pugmire; E A. Waddell; R Haasch; Michael J. Tarlov; Laurie E. Locascio;
Title: Surface Characterization of Laser- Ablated Polymers Used for Microfluidics
Published: February 15, 2002
Abstract: Fabrication of microfluidic devices by excimer laser ablation under different atmospheres may provide variations in polymer microchannel surface characteristics. The surface chemistry and electroosmotic (EO) mobility of polymer microchannels laser ablated under different atmospheres were studied by X-ray photoelectron spectroscopy and current monitoring mobility measurements, respectively. The ablated surfaces of PMMA were very similar to the native material, regardless of ablation atmospheres due to the negligible absorption of 248 nm light by that polymer. The substrates studied that exhibit nonnegligible absorption at this energy, namely poly(ethylene terephthalate glycol) poly(vinyl chloride), and poly (carbonate), showed significant changes in surface chemistry and EO mobility when the ablation atmospheres were varied. Ablation of these three polymer substrates in nitrogen or argon resulted in low EO mobilities, with a loss of the well-defined chemical structures of the native surfaces, while ablation under oxygen yielded surfaces that retained native chemical structures and supported higher EO mobilities.
Citation: Analytical Chemistry
Volume: 74
Issue: No. 4
Pages: pp. 871 - 878
Keywords: electroosmotic flow,laser ablation,microfluidics,PC,PETG,PMMA,PVC,surface chemistry
Research Areas: