Constitutive Model Data for Machining Simulation Using the NIST Pulse-Heat Kolsky Bar

Published

January 1, 2003

Author(s)

Eric P. Whitenton, Michael Kennedy, Matthew A. Davies, Gerald V. Blessing, Brian S. Dutterer, Richard L. Rhorer, Howard W. Yoon, Richard J. Fields, D Basak, Timothy J. Burns

Abstract

A new facility for dynamic material testing using a traditional Kolsky bar with the addition of controlled electrical-resistive pulse heating has been established at the National Institute of Standrds and Technology (NIST). Dynamic stress-strain data have been obtained for several metal samples at high strain rates (current capability is approximately 500 s^-1 to 10,000 s^-1). By resistively heating the samples prior to impact (current capability is for sample temperatures up to approximately 1000 ?C) dynamic stress-strain data at elevated temperatures can be obtained. These data are being generated to assist in the simulation of machining processes.

Proceedings Title

Dislocations, Plasticity and Metal Forming, Proceedings of Plasticity '03: The Tenth International Symposium on Plasticity and its Current Applications

Conference Dates

July 11-17, 2003

Conference Location

Quebec , Canada, CA

Conference Title

Plasticity '03: The Tenth International Symposium on Plasticity and its Current Applications

Pub Type

Conferences

Keywords

dynamic material properties, Kolsky bar, machining simulation

Citation

Whitenton, E. , Kennedy, M. , Davies, M. , Blessing, G. , Dutterer, B. , Rhorer, R. , Yoon, H. , Fields, R. , Basak, D. and Burns, T. (2003), Constitutive Model Data for Machining Simulation Using the NIST Pulse-Heat Kolsky Bar, Dislocations, Plasticity and Metal Forming, Proceedings of Plasticity '03: The Tenth International Symposium on Plasticity and its Current Applications, Quebec , Canada, CA (Accessed April 16, 2024)