Regenerative Stablity Analysis of Highly Interrupted Machining

Published

January 1, 2001

Author(s)

Matthew A. Davies, Jon R. Pratt, Brian S. Dutterer, Timothy J. Burns

Abstract

We discuss theoretical and experimental work that supports the use of very low radia immersion in the high-speed milling of difficult-to-machine materials, such as titanium alloys. Our theory is based upon modeling the cutting process by a kicked harmonic oscillator with delay. Traditional regenerative chatter theory predicts that, for a single degree of freedom system, the most stable speeds are at integral multiples of the natural frequency of the system. The new theory predicts a set of stable speeds at fractions of the damped natural frequency. For small damping, a subset of these stable speeds is approximately the same as predicted by the traditional theory. From a practical point of view, the most important prediction of our new theory is that the number of optimally stable speeds doubles as the ratio p of time per revolution of tool contact with the material to the spindle period becomes small, i.e., p

Proceedings Title

Proceedings of the 3rd International Conference on Metal cutting & High Speed Machining

Volume

1

Conference Dates

June 27-29, 2001

Conference Location

Metz, FR

Conference Title

3rd International Conference on Metal cutting & High Speed Machining

Pub Type

Conferences

Keywords

high speed machining, interrupted cutting, stability lobes, tool chatter

Citation

Davies, M. , Pratt, J. , Dutterer, B. and Burns, T. (2001), Regenerative Stablity Analysis of Highly Interrupted Machining, Proceedings of the 3rd International Conference on Metal cutting & High Speed Machining, Metz, FR (Accessed April 17, 2024)