Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Nanometre-scale Oxidation of Silicon Surfaces by Dynamic Force Microscopy: Reproducibility, Kinetics and Nanofabrication

Published

Author(s)

M Calleja, J Anguita, R Garcia, K Birkelund, F Perez-murano, John A. Dagata

Abstract

Local oxidation of silicon surfaces by scanning probe microscopy is a very promising lithographic approach at nanometre scale. Here, we present two approaches to optimize the oxidation for nanofabrication purposes: (i) we analyse the reproducibility and kinetics of the oxidation of Si(100) surfaces when there is no tip and sample mechanical contact and (ii) we study the effect of modulating the voltage in the aspect ratio of the oxide structures grown. The finite tip-sample separation has remarkable practical consequences: the same tip can be used to perform thousands of modifications without any sign of wear. In addition, the structures generated do not show any degradation over long periods (months). It is also found that the kinetics is independent of the force microscopy mode used (contact or non-contact). On the other hand, the application of an AC voltage to induce the oxidation significantly modifies the aspect ratio of the structures. A detailed description of the oxidation mechanism is proposed to account for both results.
Citation
Nanotechnology
Volume
10(1)

Citation

Calleja, M. , Anguita, J. , Garcia, R. , Birkelund, K. , Perez-murano, F. and Dagata, J. (1999), Nanometre-scale Oxidation of Silicon Surfaces by Dynamic Force Microscopy: Reproducibility, Kinetics and Nanofabrication, Nanotechnology (Accessed March 29, 2024)
Created February 28, 1999, Updated October 12, 2021