Davies, M.
, Schaut, A.
, Pratt, J.
and Dutterer, B.
(1998),
On the dynamics of high-speed milling with long slender endmills, Annals of the CIRP
(Accessed April 24, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
On the dynamics of high-speed milling with long slender endmills
Published
Author(s)
, A Schaut, ,
Abstract
Tool deflections of high length-to-diameter ratio endmills are measured with capacitance probes during high-speed milling and compared with the predictions of regenerative chatter theory. Poincar? sectioning (once per revolution sampling) techniques are introduced as a new means of characterizing and identifying chatter. The regenerative chatter theory seems to accurately predict the stability of high-immersion slotting cuts; however, undesirable vibrations observed in partial immersion cuts seem inconsistent with existing theory. The practical utility of in-depth knowledge of the stability behaviour of long endmills is demonstrated by the high-speed machining of an example component using a dynamically tuned tool.Citation
Annals of the CIRP
Volume
47(1)
Pub Type
Journals
Keywords
endmill, High speed machining, Milling, Milling machine
Citation
Created January 1, 1998, Updated February 19, 2017