Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publication Citation: Semiconductor Dopant Profiling and Dielectric Characterization with Scanning Capacitance Microscopy

NIST Authors in Bold

Author(s): Joseph J. Kopanski;
Title: Semiconductor Dopant Profiling and Dielectric Characterization with Scanning Capacitance Microscopy
Published: November 30, 2004
Abstract: Scanning capacitance microscopy (SCM) has been commonly used to image dopant gradients in silicon and other semiconductors. As a mobile, high-resolution (to 10 nm) metal-oxide-semiconductor (MOS) probe, SCM also is a non-destructive, contactless tool with which to examine local variations in dielectric thin film quality and local variations in semiconductor substrate properties. Virtually any measurement that can be made with fabricated metal electrodes can also be made with SCM. Two particular applications being pursued are characterization of high-' dielectric films on silicon for next generation integrated circuits and characterization of native and deposited insulators on wide bandgap semiconductors. Local differential capacitance ('C) versus tip bias (Vdc) measurements can be made with SCM using an ac voltage to generate the differential capacitance signal. These measurements differ from conventional C-V measurements due to the 3-D nature of the SCM tip and the method used to generate the differential capacitance signal. Theoretical predictions and experimental measurements are made of SCM differential capacitance versus dc bias voltage ('C-V) curves for MOS capacitors with various levels of fixed and interface traps. The goal of this work is to determine if quantitative interface trap distributions can be made using SCM and if variations in interface density can be observed near defects or device structures. The response of the SCM MOS capacitance measurement to a local electric field stress and optical pumping from the AFM laser will also be discussed.
Conference: Materials Research Society Symposium
Proceedings: Materials Research Society Symposium Proceedings
Pages: pp. 09.1.1 - 09.1.12
Location: Boston, MA
Dates: November 29-December 3, 2004
Keywords: Capacitance-Voltage,Dielectrics,Dopant profling,MOS,Scanning Capacitance Microscopy,SCM
Research Areas: